Thumbs up for ultrasonic record cleaning

I’m happy with my newest cleaning solution. The stickiness on the rubber O-rings (Vinyl Stack), I reported a while back, was due to too much cleaning solution.

After the US cleaner has rested for 5 days, upon restart I notice what looks like short fine black hair. Not a lot. I assume this is vinyl "shavings".
I finally ordered my .5 micron filter to supplement my 1 micron filter. Should arrive today. I think I’ll install it after the 1 micron filter based solely on the higher cost of the .5 filter.

Really the visual "shavings" should be taken care of by the 1 micron filter. I think the real issue is either/or a lack of proper suction or not enough volume ability to be sucked out of the tank. Maybe a larger outlet of more strategically placed outlets?

For those of you with an Elma or similar unit, how is the design in this area. Maybe, like a household sink, the water outlet should be in the center of the tank?

Then again, maybe a 5 micron filter as the first filtering stage?

In other filter applications you start with coarse and proceed with
finer and finer etc.

@totem395 

Thank you for your post. As you see, my thought process had gone that way after mulling it over. It seems to make more sense.

My Degritter US cleaner makes cleaning records a cinch.
Drop record in, hit button, go do whatever else, and return to US cleaned and dried record.
Perfect for folks like myself who are too lazy for other methods.