FR64 cartridge suggestions


Been out of the loop for quite a few years due to some 'life' events, with system in storage.

I have been able to pull my system from storage, and last year worked enough overtime to upgrade or purchase new equipment, but I have not upgraded my turntable/tonearm/cartridge yet.

My turntable is a Technics SL1000 MKII which for those not familiar, is the Technics SP10 MKII turntable mounted on a factory plinth.
I have two Technics B-500 bases with an 'E' armwand and 'H' armwand that I don't use.
The tonearm I do use is a Fidelity Research FR64, so I need a low compliance cartridge.
The cartridge I used last is a vintage Fidelity Research FR-1 MK3 F, which needs to be re-tipped, and I will do so once I get a replacement.

The rest of the system includes:

Zesto 1.2 Andros tube phono stage
Zesto 1.5 tube preamp
Quicksilver V4 tube amps (new KT150 version)
Green Mountain Audio Continuum 3 speakers
JL Audio 113 Fathom subwoofers (pair)

Curious what cartridges other high mass tonearm owners are using, especially those who use Fidelity Research FR64/66 tonearms.

Looking for cartridges under $2000 USD at most.. probably should spend half that.

I have over 20K records, so I am very anxious to get this back into service.

Really curious about suggestions and thanks in advance.



128x128Ag insider logo xs@2xrich121
It is surprising how many different types of cartridges can work with the FR-64, despite its heavy effective mass. An obvious first choice would be the FR-7 series. You can get an early (silver) FR-7 for around $1000 and the improved FR-7f for around $1500. The FR-7fz and the final MC-702 variations are superior still, but have become quite rare and expensive.

But if you don't fancy hunting down such vintage systems (with all the risk that goes with that territory) I would strongly recommend the Phasemation PP-300 (or earlier P-3G), which you can buy new for around $1500. Truly a marvelous cart and a great match with the FR-64S.


 Keep in mind that one reason the FR tonearms have such a high effective mass is because their headshells are quite heavy, as headshells go. Therefore you can reduce the effective mass of the tonearm by using a much lighter weight headshell. For example, I don’t recommend it, but I am using an Acutex LPM 320 in a dynavector headshell on my FR 64S. The Acutex has a stated compliance of 42, so this combo shouldn’t work well, but it does. This is to say that you need not feel terribly restricted by the high effective mass.
Stay with FR-3Mk3F and buy a first class diamond for it from your retipper.
It is a top cartridge when done right.
+1 syntax! Keep the FR-1 mk3F and have it retipped! Truly excellent mc cartridge - I have owned several! Easily competitive with far more expensive mc's!
The cartridge I used last is a vintage Fidelity Research FR-1 MK3 F, which needs to be re-tipped, and I will do so once I get a replacement.

Posters
The OP is looking for replacment while his FR-1 mk3 will be off for re-tip.

@rich121 i think you have to read this thread first of all:

https://forum.audiogon.com/discussions/fidelity-research-cartridges?highlight=fidelity-research%2Bca...

Simply read J.Carr’s comments

If you really like FR sound then Fidelity-Research PMC-3 is the one to look for until you will find FR-7f or FR-7fz which is the ultimate.