Help with advice for high end speaker cables for my system!

The very low impedance of your speakers in the treble region (descending to 1.2 ohms at 20 kHz) will likely cause them to react differently to a given speaker cable than the results most others may report for the same cable. And in particular that impedance characteristic will make the inductance of the cable more critical than in most other applications. Although the short length you require will work in the direction of reducing its criticality, since cable inductance is proportional to length (as are most other cable parameters).

So in addition to possibly pursuing the good suggestion of The Cable Company, I would focus on researching what cables others are using in the specific case of Martin-Logan electrostatic speakers, most of which have similar impedance characteristics.

A good way to find such information would be to enter the term "Logan" into the search box of the Virtual Systems section of Audiogon, and peruse the system descriptions that search turns up. (For some reason entering "Martin Logan" into that search box produces an error message).

Good luck. Regards,
-- Al

I came across a number of recommendations for Tara Labs speaker cables for use with my ML Montis and went with RSC Prime M2 (purchased from the Cable Co.) Very satisfied with them. Also, enjoy them with other speakers that I have. Everything seems to tighten up.

Interesting advice from elizabeth & photon46 ref. investing dollars in ic’s vs. speaker wire. Don’t think I’ve come across those opinions before on these forums. I guess I’ve leaned in the other direction. Thanks.

There's a pair of Satori shotgun biwire cables available here now that are the same as mine except they have banana connectors instead of spades.  To maybe somewhat address Al's comments, these cables are stated to have extremely low capacitance that can help reduce high frequency roll off, although I don't have numbers to back this up.  As I said, switching from old Monsters to these provided all the benefits you're looking for, but my speakers are a more conventional design and relatively high efficiency.  The really nice thing about buying used is that if they don't work out you can likely sell them at little or no loss of you negotiate a good price.  Again, best of luck in whatever you choose. 

Elizabeth! Kimber 8TC are very nice cables! Snell used them for the Type A Reference as a proprietary harness. It would be difficult to get more bang for the buck. Happy listening. Joe