Lifters ForGetting Cables Off The Floor, Worth It Or Snake Oil


  •  I'm looking at some porcelain cable lifters to get some power and speaker cable up off the floor.  Does raising the cables off the floor really make a difference? It's going to be about 200 bucks for 10 of them. Thanks.  
zar
Elevators never worked for me......not positive or negative.  If you can return them give them a whirl
gbmcleod
Geoffkait, do you have to have your spring vertical for the best sonics? You sure do with the Townshend, although it will sound great - even fantastic- with them at the angle. But the "air" will disappear a bit as the bottom part of the springs moves out of vertical alignment (completely my error, of course), and so the field of depth is like an accordion when you push the sides together. Just sayin’.

>>>>>Of course springs should be vertical. If they aren’t their spring rates won't be linear, under the force of gravity, which is vertical, they won’t be as "springy." Consequently isolation effective will suffer. If the springs are angled enough away from vertical you can probably visualize in your mind’s eye they won’t behave properly. The easy way to check for proper operation of whatever is isolated on springs is to manually get the system in motion up and down and observe whether the action is smooth and unrestrained by non verticality of springs or by external forces like power cords or cables or by non uniform distribution of mass on the springs. Sometimes careful adjustment of spring locations can be very helpful in that regard. Of course for heavy masses springs must be placed wider apart than for lower masses.
This might be a good place to mention that all furniture in the room should be isolated from the floor, especially heavy couches, bookcases, tables, etc. For this purpose employ the best cones you can muster. For cost reasons I recommend Small size DH Cones, Diamond Hardness ceramics. Any cones you have lying around waiting for their next mission will do. 🎉 🎉 🎉 🎉
and speakers ..and anything else that comes in contact with 1 or more room boundary,etc, etc. All the objects mentioned can have their interfering energy reduced by mechanical grounding so the contaminating energy is not added back into the sound of the room and the music. Some of us have installed Audio Points and coupling discs under chairs, cabinets and many decorative pieces that hang from walls and ceilings..doing this for several years. Same holds true for musical instruments and any of their speakers and electronics. Tom ..Star Sound Technologies
Tom, the cones under furniture isolate the furniture, reducing the ability of very low I.e., seismic structureborne frequencies to excite the resonant frequencies of the furniture, which are very low. It’s an excellent example, though a very indirect one, of the importance of isolation. The speakers are actually a separate isolation issue but they should also be isolated from the rest of the room and system.