Yamaha GT 2000 Turntable


Hello there ! Looking for any Yamaha GT 2000 owners / ex owners out there to share their experience and opinions regarding this turntable ..
blz_tone

bimasta
I would use a Variac to coax the Denon gently back into action, 
I would use caution prior to using a Variac, some circuits react poorly.
that said I'm not a teck.


"Now, next question: what's the best reasonably priced cartridge (<$1000) to use with it?"

I believe you may have read the tread on another forum regarding the metal rods that are present running down its length and were 
removed by the owner to accommodate a less restrictive cartridge
selection?

Personally the only thing regarding the GT-2000 that is an "iffy" factor
for me is the limitation of optional arms that can be mounted
without some surgery. 



Bimasta,

I'd state that the stories you have "heard" are vastly exaggerated, I have had over 50 of various DP series coming through here over the past few years and have never had one with a "chip" out.  Once recapped they perform excellent. 

Im working on a "GrooveMaster Vintage Direct Professional" issue of the DP80, with some of the features of my Current rebuild of the Denon DN308 (4 pieces) All spoken for already :-)


http://pbnaudio.com/audio-components/audio-turntables/groovemaster/groovemaster-vintage-direct/pbn-d...


It involve of course scrapping the pot metal frame they are mounted on replacing it with 1" machined aluminum top plate and bottom plate sandwiching a hardwood frame.  The Variable/Fixed speed selection will be eliminated along with the strobe light, which will be replaced with the Roadrunner tachometer form Phoenix Engineering, I picked up quite a few of these when they closed shop.

Stay tuned on updates   


Good Listening

Peter


 
bimasta,  My DP80 was not working quite up to snuff when I bought it.  So first of all, I assumed that the single chip that runs the turntable was not working normally, and I WAS able to find it from any of several vendors in the Far East.  In fact, it was easy to do that, and I have several such chips myself.  Then I gave the turntable and the replacement chip to Bill Thalmann at Music Technologies in Springfield, VA.  Bill found no problem with the chip in the turntable, but he did replace all the electrolytic capacitors and all the discrete transistors.  The transistors were not blown, but Bill felt that the modern replacements for them are much better and make the DP80 run better.  He was then able to calibrate it, and I have had zero problems ever since then, about 4 years. I urge you to have all the electrolytic capacitors replaced, ideally before you try to run the turntable, especially if you don't know when that was ever done in the past.  (If it was never done, those lyrics are now ~36 years old, definitely hot reliable.) Consider it preventive maintenance, and if you do need a new chip, I can get you one.

Thanks Totem — I'm not a tech either.

Anyone, please correct me when I'm wrong, that's why I'm here: to learn. I've used Variacs on older less sophisticated all-tube circuits — that seems to be okay. I know newer SS gear has voltage regulators, relays, etc, that might make the Variac ineffective — but I was under the impression it was not HARMFUL, merely ineffective.

Am I wrong?
I've seen your site before, Peter. Incredible work! My ambition at this point is far more humble — just to use this marvelous turntable again, and be sure it's not damaged. It's very reassuring when you say "I have never had one with a "chip" out."

But you also have a caveat:  "Once recapped they perform excellent."

So, like Lewm, you're saying recapping is essential?

Again, please correct my errors.