2. analog
  3. 127614-89202

Having difficulty installing Grado cartridge on a Rega turntable

I'm trying to install a new Grado Sonata 2 cartridge on my Rega RP3 turntable. I'm replacing the Grado Sonata 1 cartridge which was installed by the dealer who is now inaccessible. I understand Rega and Grado are somewhat incompatible. I'm having all sorts of problems installing the new cartridge and need help. It doesn't behave like the old one.
Does anyone know of a Rega service person in the Long Island, New York area?
128x128rvpiano
raymonda
855 posts
 
Rega arms and grado  cartridges are not incompatible. I'm not sure where you heard that one.

But whatever you have going on is something totally diferent.

Ag insider logo xs@2x
cleeds
5,644 posts
 
rvpiano I found the problem

The stylus is bent off center.  I'll have to return it.
You probably mean that the cantilever is bent, not the stylus. Either way, this doesn't sound like the cause of your problem, but rather  damage that occurred during the install as a result of it.
tooblue
1,882 posts
 
cleeds makes a great point, I know I have in the past had carts that their cantilever are a bit askew and I just set the cart where the cantilever is straight not the cart body. Sounds more to be a glitch in the antiskateing set up.
czarivey
5,676 posts
 
there are much more variables on sliding over the label at the end of playback:

1. horizontally leveled turntable position
2. anti-skate
3. VTF

seems like it's already been done LOTS of trial/error and indeed professional help is desirable to stop 'torturing' cartridge, arm and records.
orpheus10
8,668 posts
 

I had a Grado Sonata that I was quite happy with, now I've got a Grado Master with my Rega, and I couldn't be more satisfied.

Good luck.
More to discover