Best 5.1 McIntosh separates


I'm considering building a 5.1 separates (Pre, amp, processor, etc. setup). Currently I've Nakamichi RX-505 Tape Deck, Tyler Acoustics Linbrook System II speakers, & Sony BX-57 (S570) BD player.

Apart from CDs & cassettes, I do not have any other type of music formats. I usually watch movie (65%) & listen to audios (35%).

I would love to build my system around Tube Amps (preferably McIntosh) but also like to support HDMI 1.4 (3D HDMI) & digital media server type of setup for audio/video streaming.

However, I'm not conversant with various McIntosh model numbers & their features. Can anyone suggest what would be
the best separate setup around $2000?

Thank you!
hitsofmisses
Lots of things are possible but you need to define what you are looking for.
A BR player?
A MCH processor with HDMI 1.4?
A 5 channel amp?
Some speakers?
A subwoofer?
May be I was not clear in listing my intent.

I had a 10+ yrs old 5.1 setup with a Kenwood Receiver. However, after upgrading from DVD to BD Player & speakers to Tyler Acoustics Linbrook, I'm considering going for a Pre, Amp, processor (separates) type of a setup instead of an all-in-one receiver.

Since Oppo 95 also has a dedicated processor for Audio along with HDMI 1.4, I was wondering if I can use that along with the McIntosh since having that on Mac is very expensive.

I have around $2000 budget!
OK. So, it seems that you have the Oppo and the speakers and that you want to replace the Kenwood receiver with Mac separates. If you are willing to use the analog audio outputs of the Oppo, you can buy a used, older non-HDMI Mac processor but I still do not think you can get one of those plus a multichannel Mac amp (or monoblocks) for $2K.

If anyone else has an insight or suggestions, I hope they will contribute.

Kal
I think a MX130 or C39, plus a MC7106 amp, can easily get you there on that budget. Make sure the processor has been modded for a six-channel input (or it's a later MX130 that came with one stock).

You can then use the 5.1 analog outs from your Oppo and run HDMI directly to the monitor. The main drawback is that your other sources (i.e. cable TV) will be in Pro Logic only.