2. analog
  3. 1448690055

sonorous1

Symptom: Running a Benz Micro ACE M on a origin live conqueror arm. Purchased a JC3 and I am getting distortion on the highs and lows. The output of the Cart is .8mV. I'm thinking the Cart needs to be a lower output so that it will play nice with the JC3. Thoughts?
sonorous1
mofimadness's avatar
mofimadness
4,934 posts
 
Are you using the MM or MC input on the JC3?
sonorous1 OP
11 posts
 
47ohm mc input
swampwalker's avatar
swampwalker
5,138 posts
 
You may be overloading the mc input, try the mm and see if you have enough gain.
mattmiller's avatar
mattmiller
1,479 posts
 

.8mv is still pretty low, that's not the problem.  Also, I would use the 100 ohm setting not the 47,000 ohm. The Benz M series is at 24ohms the JC3 only has 2 settings for MC and the 47,000 ohm setting is too high for that cartridge. Also, the JC3 has a AC polarity switch that you can use to eliminate ground hum.


Regards,


Matt

More to discover