2. speakers
  3. 1243774232

Subwoofers for Magnepan 20.1s?

I used Granite Audio's Ultimate Low Bass CD and my 20.1s go to 25Hz at -10dB and my room is 16x26x10 (speakers approx 6ft from back wall and 3.5ft from side walls on ends). I can get -6dB in the 29-33dB range and then it is pretty flat with a slight drop in the 50-60Hz range. I am not a bass fanatic, but on some recordings, I wish I had some further lower bass extension without becoming unnatural sounding/boomy. I know HP likes Nola Thunderbolt subs with the 20.1s. Has anyone tried them or any others? Other system components: Pass X250.5 amp and Xono phonostage, Audio Research Ref 3 preamp and Ref 8 CD player, VPI superscoutmaster reference turntable/10.5 tonearm, Dynavector XV1S cart.
powerdoctor
hornguys
180 posts
 
I recently voiced a pair of Martin Logan CLXs with the M-L Descent i subs.

They were smooth, went deep, were lively and dynamic, and blended almost seamlessly with the CLXs.

From that experience, I'd suggest that the Descents would go nicely with the Maggies.

Of course, you need two of any sub for the best sound, so I'm referring to a system with two, most definitely NOT one.

See relevant comments beginning at post 190 in this thread:

http://www.martinloganowners.com/forum/showthread.php?t=7730&page=13
gladstone
296 posts
 
Very few subs will mate with the 20.1. My advice is to try one of the JL Audio subs. The ported bass of the Rel makes it sound a little sluggish in tandem with the 20.1. In my experience, only a sealed sub has any hope of keeping up with the bass panel.
johnk's avatar
johnk
1,973 posts
 
Dukes Swarm is a good design. Martin Logan Descents work well,but you will need at least 2. Also KSC has a 31.5in driver in custom bass system which was designed with large loudspeakers like maggies in mind. Low excursion bass systems have far better transient responce over large excurtion floor corner reinforced subwoofer systems with all there many comprimises in design. The large driver only moves slightly so less detail is lost than hi-excurtion designs. Lots of detail in low bass most never experance this since they use conventional sub designs.
gladstone
296 posts
 
John--several of us noticed that you used the (slightly) less expensive version of the 31.5" driver in your bass cabinet and were wondering what your thinking was in making that decision? The more expensive one appears to have a free standing resonance frequency, doesn't it?
gladstone
296 posts
 
I meant lower free resonance frequency.
More to discover