Vandersteen Quattros - Top Wooden Shelf DEFECT?

Remove the top by sliding it. You will see the screw(s). The screw provides sliding/tracking and hold down function. Take a screwdriver and tighten the screw just a bit (maybe 1 or two full turns in clockwise direction). This should prevent the top from sliding to easily. If needed loosen or tighten the screw until you get the perfect fit.

P.S

It is not a big deal - really.
......and yes, it is a part of the design - but it should be a tight fit.
The tops slide towards the front of the speaker but away.

Mariusz

Bad scenario -
they might have been damage in shipment. Inspect the tops' bottom side and top of the speakers ( mounting bracket for the top piece ).

Hope you get that resolved.

M.

The Top wooden panels are easy to adjust
1st tap the wood with your hand from the back toward the front of speaker.
when it comes all forward pull it off and you will see an adjustment screw on top of the speaker.
snug screw so the top fits as tight as you wish
Hope this helps
John