HELP Electrocompaniet stole Christmas


What a mess:
After finally deciding that spending money on the latest EMC-1 parts mod, I contacted Electrocompaniet's distributor back in October to arrange to bring my EMC-1 MkII to him directly in PA so as to avoid RT shipping risks and expense for this 50 pounder. All was set for a Christmas week mod, as I was to be in NJ visiting my relatives that last week.
I called on Christmas eve to arrange a drop-off time, and was told that Christmas Day noon would be fine, but that I had to arrange the deal through a dealer! Yikes! So I remembered Fathers & Sons and called them, arranging for the paperwork and profit to be credited through/to them. Fine. So I drove 2 hours through a nasty winter storm to arrive at Warshaw's house, where he said he'd NOT perform the mod if my EMC-1 didn't have a serial number on it, as there was a grey-market guy in New York who sold a few of these this year. I assured him that mine indeed had a serial number, was produced in spring '01, and bought used by me in summer '01. He said OK, and lugged the player into his house, saying he'd call me in a couple of days to pick it up. Great!..............
I returned to NJ and watched the storm intensify....
Two days later I called to arrange a pick-up hour, and Alan told me that he did NOT perform the mod because the player had been originally sold by a Danish dealer, and NOT through him, so he had made a decision to NOT support any players not originally sold thorough him. No warranty repars, parts, nor mods!..............
I was stunned, couldn't convince him to make an exception since he had never asked me to provide a serial number beforehand, and I went through a total of a half-day of driving through a storm to accomplish this mod.
He just told me to come pick it up at my convenience. I glumly arrived on Saturday and retrieved my untouched puppy, where Alan said that unfortunately I had to share the victimization of the gray-market. I asked if I should contact a Danish dealer to see if a board-swap could be done (of course thinking he didn't really know the answer), but he thought that Electrocompaniet wouldn't support my player either! I asked with some incredulity what was going to happen with all the players that people have when they move from one country to another (!), but he said that this policy was the only way they have of penalyzing the gray market.... I suggested that in THIS CASE he should have installed the mod because of his lack of due diligence in assessing the production/sales history of this particular CDP, ESPECIALLY given my enormous effort in delivering it to his doorstep on Christmas Day.... I left sadly but gracefully.
WHAT SHOULD I DO? I contacted the Danish dealer but he's not responded. Should I contact Electrocompaniet directly and try to arrange a board swap or purchase the parts mod "kit" and instakllation directions (I'm pretty familiar with boards and soldering)? Should Alan have acted differently? Isn't the world getting small enough so that internationally-sold products should have protected lives independent of sales point?
PLEASE HELP!
A Happy and safe New Year to all!
Ernie
subaruguru
Thanks, guys.
I need to repeat that I am in no way attempting to seek recourse through F&S. I repeated to Mike that I expect NOTHING of him, as his only link was to be a nice guy on Christmas Eve and offer to sell me the rights to a mod at a (claimed) small profit. He insisted on wanting to be creative about resolving this situation, for which I am extremely grateful. I suggested that he was under NO obligation to offer to buy my unit in exchange for cash and a new one, but he repeated twice that mine would be of perfect service as a permanent demo for him, and obviously cost him less (I'm suggesting $1000) than a new one. If he can do it for $1000 then I'll probably agree. If he can't then the next unknown chapter evolves. I told him that he needn't be a hero here, and he knows it. We NEVER talked about a money amount. He simply said he'ds get back to me by today, and perhaps has been too busy to. I'm really quite prepared to be patient about this, but as some have pointed out, eventually I'll probably not want to even own an EMC-1 if it becomes more painful to do so. For now I'm hanging in and appreciating your comments and suggestions.
I appreciate that EC offers an upgrade mod rather than a "new-and-improved" replacement model. The actual cost/value of the mod is unknown to me, but I eventually decided that it was worth $500-600 to me if I could trust dealers' comments on the sonic improvement. As I said above I'm willing to pay more if the only way to resolve this is to swap out entire units. But if it's going to cost me more than $1000 to "buy" an agreed-$650 upgrade I would feel too punished to proceed. It's not like I haven'y gone overboard in good faith already.
Ljgj: how can Heinz help? Does he know how to duplicate EC's cap 'n resistor mod prudently? Is there another path here? Sigh....
I've read all the posts so far and I want to wish you well Ernie. I can't believe the extreme poor judgement by Alan, the U.S Distributor of EC, not once but twice. This is no way a person is to be treated. I applaud F S Audio in their efforts to help. Business'/companies which offer superior customer service will prosper and grow while others will not be so lucky. Thank-you Sos for your post, I never realized some of the things you said. I hope things will work out for the best, both in this matter as well as your health.
Sean: Re your compliment to Jctubes about his response to Sos' post, I think I could say the same thing to you about your response as compared to mine! Sometimes, direct is better than polite. And yes, we are saying the same thing. :-)

Ernie, although it is clear that F&S are trying to bend over backward to save you some pain in this matter (even if the two of you cannot ultimately reach an agreement that works), I still think you need to get EC involved and aware of your situation and position regarding this issue. I believe that the only entirely satisfactory solution (your inconvenience so far notwithstanding) is for you to have the upgrade mod performed at the normal price with the factory's blessing, without addtional shipping charges, whether this be done by the distributor or by some qualified and approved technician or dealer closer to your location. IMO, you may have let Mr. Warshaw off the hook too easily on Xmas day, but you've really got to stand up for yourself with EC now, even if it means alerting them to the presence of this thread (and even if it means saying thanks but no thanks to the honorable F&S). You'll be striking a blow not only for yourself, but also for any of those members for whom your previous posts about this player may have been an influence to purchase one. In particular (and if true), EC's supposed position that an apparently unreachable and ethically questionable Danish dealer must forevermore be responsible for any and all service - including paid upgrades, and to any and all subsequent owners - for these alleged gray-market units world-wide is totally untenable and outrageous, not to mention without justification and just plain bad business.
JCBtubes very insightful response. The story that I am told by Alan is a little different but that is not the heart of the matter anyway. I have no idea what actually took place and I will be the first to state that I would have handled it differently whether it went down the way described by Ernie or Alan.

The issue is what do you do with "grey market products" and still protect the integrity of a product lines value and dealer network.

We are talking about EMC 1 players that retailed at the time for $5000 and were sold between $3000 and $3400. Doesn't anyone believe that is destructive to a product line? Is it fair to the dealers who have stock in inventory, is it fair to the distributor that has spent years developing a line, but most important is it fair to the majority of the customers in this country who paid anywhere from $4250 to $5000 for their CD players.

The issue is not so much protecting the used market because the people who purchase a product that cheaply will dump it for less than the person who paid $5000. The used market is already damaged but more important an artificial price on the new units is established which could hurt the dealers who are responsible for taking care of their customers, and the distributor who does the warranty work not only for the original buyer but the future buyers.

I agree that it would be nice to find a solution that is more inclusive than exclusive. But what is to keep rogue dealers in Europe from selling to friends in the states brand new units that they turn around and market on the internet?

Ernie is the first one to complain on Audiogon but I have had several customers who purchased these units before I even knew about them and they have had problems. I have tried to intercede and help them but the issue comes down to what do you do? What is fair?

Yes, there is profit in doing the $800 upgrade but Alan in doing the upgrade felt that he was betraying his dealer network. We were told not to take the units in on trade, not to work on them or be involved in anyway. How could he demand that of us and then go against what he had instructed us to do?

F & S is a great dealer and a friend but in the final analysis I would be glad to hear a solution to resolve the issue for the 10 units on the market because this will not stop here - - someday those units without a warranty will be resold and what happens to those buyers?

The easy solution is since the pool of Electrocompaniet products has been corrupted just give a warranty to the initial owner only which is becoming more common everyday.

I hope to never see that happen but more and more companies are going to that and one reason is to limit used sales and to fight products that are grey market.

I am impressed with all the responses even the ones that slammed me. And I must admit that at first I was not going to respond but I had so many customers contact me and request that I respond in some way even though this really has nothing to do with me except for the fact that I carry the product and love it, consider Alan a good friend who has always been wonderful to me and my customers and has always responded in every situation.

The only times that we have disagreed has had to do with what to do with the "grey market units." Not as far as upgrades but performance and warranty issues.

Since so many of you have responded I am curious please use your imagination and imagine that you are responsible for a product line in this country. "Grey market" units are being introduced into the US how do you protect your dealers, customers, and your own interest?

I know many of you seem to have trouble with the fact that it is an upgrade we are discussing but the upgrade was created in the US and that is one thing that Europe did not have available till just recently only the US market. So the upgrade has significance since that is something that no "grey market unit" could have nor does have!

So in the final analysis what is fair. If someone purchased a "grey market unit" offer them the difference between the new retail price of $5500 which includes the latest upgrade versus what they purchased the "grey market" unit at minus a 15% discount which is about what they discount at? So $4675 minus the $3000 they paid so they get the upgrade plus the full warranty for $1675. Then there are no units without warranties?

Be creative I have no control over what happens but I can bring this up to Alan at CES. I mean whatever happens if people are looking for what is right should be win win for everyone.

When I state everyone here I am referring to those customers who purchased the "grey market units", Alan who has invested years to Electrocompaniet and done wonders with the line, the hundreds of Electrocompaniet customers, and the US dealer network.
I appreciate Stewart's position and count him as one of the few really good dealers around. I have purchased from him in the past and would again, but I think Sean said it all. This is an upgrade. It is an aditional product so the worst thing that could happen for Alan would be that he makes a few hundred bucks for performing the upgrade. Instead, he has created a self inflicted wound which continues to get worse. Alan has his principals, his pride, and now, probably a lot fewer sales.