2. amps-preamps
  3. 1072350543

Cary SLI 80 stopped working

Help. My SLI 80 which was working perfectly last night simply won't power-up now. (It is the older model with no remote or headphone jack.) No green LED, no tube glow... nothing! There is power at the plug, and the two fuses at the rear appear (from what I can tell) to be good.

Any ideas?
schwartzwest
the_kid's avatar
the_kid
465 posts
 
I know you have probably already done this but my amp did the same thing one time. My problem was my aftermarket Audience Power cord was had pulled away just far enough out of the IEC receptacle. Pull your power cord out of the amp and plug it back in. Also check the source it is plugged into.

If this doesn't do the trick. You have probably blown a fuse.

IMHO

Chris
kt_88
242 posts
 
I would check the fuses om a volt-omh meter. Sometimes they appear to be good, but are bad. This is assuming the pc is all the way in. Also it is possible the power on switch is bad. If you replace the fuses make sure you buy them at Radio Shack. " 250amp for home use " not the automotive type.
alvu
9 posts
 
Hi,
I used to owned one if i remember correctly there is a AC fuse holder right at the IEC receptacle check it out.
More to discover