Wooden blinds vs cellular shades for acoustics


Standard old school advice for large window acoustical treatment seems to be "heavy draperies". Some cellular shades (Hunter Douglas, Bali) have high factory-rated NRC (0.60 or better). That's about the same for what little I've found for draperies.

Recently, I heard that partially-open wooden blinds are best for acoustics, acting through diffusion, rather than absorption. Opinions? Experiences?

Thanks
leeofb
I have three windows on the left side of my room that measure approx 34x60 ea so in effect the windows dominate that wall. I previously had cloth vertical blinds and recently replaced these with solid wood shutters.
Sonically, I feel it is an improvement compared to the verticals. It is also possible to make some adjustments to the presentation by different orientations of the wood slats. It is not a major change, subtle but noticeable. I don't know how the shutters would compare to standard drapes or other types of blinds. I feel I made the right choice. I will post updated room photos in a couple of weeks once new carpet is installed.
I was where you are going to be in regards to your carpet.When that goes in all else will be majorly overshadowed.In my place it was a good thing as I am in a condo.If I had my own place I would go with wood floors,YMMV,Bob
I have wood blinds behind my speakers, never experimented with partial opening, unbelievable! Will have to try this weekend.

Closed, they are reflective, it will be interesting to note the amount of added diffusion when partially opened, something I've been looking for. It does seem that the diffusion properties would be somewhat limited by the window behind being in such close proximity to the wood blind. In the summer the storm window can be pulled out, I suspect the added space behind would increase the diffusive properties. I also have cellular shades on one side wall, these absorb sound, however, not to the extent of my Echobusters.
Hi
I've treated my main picture window and smaller sides with wood shutters,(solid, no slats). Made a huge difference over blinds or drapes. I bought unfinished ones from Lowes, staind them to match my other wood surfaces, then treated them with larch resin to try and give them the best reflective surface I could find, sonically much better than regular poly. It's great. Look up mother of tone website and you'll see what I'm talking about. You can get the varnish from Sinopia. Also, since glass is not our sonic friend, I'm using Marigo dots on the windows, and it is a fantastic tweek. That might interest you as well. Good luck. If you really want to make your room sound great, it's worth it.
I'm having a problem with a 5'x6' standard double glazed window (1/8" glass). The sucker rings at midrange frequencies. Yech! I've tried putting powerful 2" magnets on both sides to keep it from resonating (little help), I have thick velvet curtains with backing on them in front (still rings). The people who install plastic films on windows doubt it would help. I'm talking to the window people about getting laminated glass replaced in - but that will likely be costly. I don't know about the Marigo dots - can't imagine they would be much better than the magnets. This could be an expensive fix, as the glass they use is thin enough to be like a drum membrane.