Why do I need a switch?
I just watched a few videos about audiophile switches and I don’t understand the need. Cable comes into my home and goes to a modem and then a NetGear Nighthawk router. I can run a CAT6 to my system or use the wireless. If you don’t need more ports, why add something else in the signal path? On one of the videos the guy was even talking about stacking several switches with jumpers and it made the sound even better. He supposedly bought bunch’s of switches at all ranges and really liked a NETGEAR 8-Port Gigabit Ethernet Plus Switch (GS108Ev3) That costs $37 on Amaz.
Thanks in advance.
One more question, do you have the converters before your router or plugged into one of its outputs. I’d have to put it before the router because I mostly do WiFi. Otherwise I have to use a netgear Powerline adapter. NETGEAR Powerline adapter Kit, 2000 Mbps Wall-plug, 2 Gigabit Ethernet Ports with Passthrough + Extra Outlet (PLP2000-100PAS) https://a.co/d/4YswvJv And lord knows how much noise that puts into the mix! Thanks |
my belief gained through my travels on this subject is that good clocking and elimination of electrical noise pollution are both important... the importance of the latter highly is dependent on the nature of upstream signal feeds/routers and of course, one’s digital music source (multi use computer, streamer, renderer, what have you...) it is not just about the integrity of the transmitted data packet info (the networking guys only focus on this, this is a necessary but insufficient condition for success in hifi reproduction), it is about how the data gets decoded accurately back into analog without distortions caused in the process (which requires proper timing and electrical properties of the waveform being read during the conversion...) |
@curiousjim I am running the Finisar FCBG110SD1C03 and also the FTLX1475D3BTL like tube rolling (snicker) and I am using the Mini Unmanaged 1x 100M/1G/2.5G/5G/10GBase-T RJ45 to 1x 10GBase-X SFP+ Slot 10Gigabit Ethernet Media Converter, AC 100V~240V or DC 5~12V |
Put the converters after your last Ethernet connection. I thought you were planning to run CAT6 to your system. The other thing uses your home electrical wiring to extend your Wi-Fi. I know nothing about that but suspect there could be a risk of adding all sorts of noise (others here know more about that than me, I am sure). I would put the converters after the Ethernet cable that comes out of the adaptor kit, or at the end of your CAT6, if you choose that route. BTW, unless you already own the CAT6, consider using CAT8 for the additional shielding. The cost difference is not that much. |
