I don't know. There is a rumor that some Mac's come with Class 2 Drivers already installed. I don't have a Mac, so I plead ignorance. If it can handle 24/196 across its USB Input, the DAC must have a Class 2 Input. Class 1 is 24/96. The issue is the lack of Class 1, Class 2 Drivers on the PC side. Some Manufacturers of USB Converters and USB Input DAC's, aren't producing true 24/96 PC Class 1 Drivers to go with their Equipment. The Manufacturing costs are much cheaper to produce a Driver that outputs only 16/44.1. They then blame it on the non-existent limitations of USB. I believe that is the point of this Website, I can't say for sure either way. I was hoping for some clarification. Again, what is the reality of USB and High Sampling Rates? This Novice would like to know.
What is the reality of USB and High Sampling Rates
Here is some information that I found on a Website. Thought that I would share it:
THE WELL TEMPERED COMPUTER
An Introduction to Computer Audio
USB Audio Devices can use USB 1 or USB 2 but all conform to the USB Audio Class 1 specs. USB Audio Class 1 supports resolutions up to 24 bits/96 kHz. All operating Systems (Win,OSX,Linux) support USB Audio Class 1 natively. Alot of USB DAC's are limited to 16 bit 32/44.1/48 kHz. This is obviously not a limitation of the USB Audio Class 1 Driver but a matter of a cheap Hardware solution. The more expensive models support the full Audio Class 1 Standard. Very few support the Sample Rates 176 and 192kHz because this requires the development of a custom USB Audio Driver. The Final Specs. for USB Audio 2.0 were released early (2009). USB Audio Class 2 now supports 176 and 192 kHz. At this moment (August 2010) USB Audio 2 is available in OSX 10.6.4 and Linux. It is unclear if Microsoft is going to support USB Audio 2.
Not my words guys. Any comments?
THE WELL TEMPERED COMPUTER
An Introduction to Computer Audio
USB Audio Devices can use USB 1 or USB 2 but all conform to the USB Audio Class 1 specs. USB Audio Class 1 supports resolutions up to 24 bits/96 kHz. All operating Systems (Win,OSX,Linux) support USB Audio Class 1 natively. Alot of USB DAC's are limited to 16 bit 32/44.1/48 kHz. This is obviously not a limitation of the USB Audio Class 1 Driver but a matter of a cheap Hardware solution. The more expensive models support the full Audio Class 1 Standard. Very few support the Sample Rates 176 and 192kHz because this requires the development of a custom USB Audio Driver. The Final Specs. for USB Audio 2.0 were released early (2009). USB Audio Class 2 now supports 176 and 192 kHz. At this moment (August 2010) USB Audio 2 is available in OSX 10.6.4 and Linux. It is unclear if Microsoft is going to support USB Audio 2.
Not my words guys. Any comments?
5 responses Add your response