Should I fix my plasma?


My 2005 vintage philips plasma 50" has a wide splattering of black dots all over the screen. These sometimes go away after 30 minutes but sometimes they stick around for a couple of hours after I turn on the tv. When the spots are gone the picture is gorgeous. Would it be better to just get a new tv or try to have this one fixed? I wouldn't mind getting a 1080p upgrade and maybe even going bigger.
128x128truemaineiac
I ended up with a panasonic 60" gt and got it all set up today. So far it is awesome. Thanks for the help.
If you could find a repair service to replace the bad components it's worth it. Had a 50" fixed for $100. some bad resisters. The problem is most places want to replace the whole board, which makes it not worth the money.
As a general guide, the best values tend to be at the lowest end of a manufacturers best line of panels/series. Don't discount the value of extra size. While one very often hears buyers complaining that they wish they went bigger, one rarely hears complaints from those that wish they went smaller.

http://myhometheater.homestead.com/viewingdistancecalculator.html
www.AVSforum.com is also an awesome resource when trying to make a buying decision on TVs.
The companies have different lines which have different features. As a generalization, you get additional HDMI inputs, THX or ISF certificiation, apps, and Internet connectivity for Netflix, HULU, etc.

At a certain size you also get a significant price jump. So around 55"-60" is where you get a much larger price jump vs. 37"-47"

The best thing to do is read reviews at www.hometheater.com or www.soundandvision.com and use those as a guide.
Ha, Black Friday around the corner and daily deals at the likes of BestBuy etc. Buy new. Your biggest hassle may be simply getting rid of the old set. Price to fix versus new with warranty, not even close.
Your local dealer should be able to explain the differences better than we can here online. But in short the more you spend the better the display a better screen, a better power supply, a better processor. All resulting in a better picture. Also look at the Panasonic website and do the side by side comparison on the format they offer
Thanks for the replies. I don't often need too much encouragement to get a new piece of electronics so the validation of that notion is exactly what I was hoping for.

In looking at new plasmas, I see 55" plasmas in panasonic at $1200 and $2500 which both seem to be 1080P and 600hz. Where is the extra $$ going for the more expensive plasma tv's? I don't mind spending extra if it will give me a better picture but it seems like there may be other differences.

When it comes to flat screen TVs, buy as cheap as you can, consistent with a good picture. I got my Panasonic 42" plasma this year, and will be surprised if it lasts five years. Great viewing experience. $398 at walmart.
Agreed. Don't throw good money after bad...

Get a new TV and and upgrade in the process. Get better picture quality, probably lower power consumption and a "reset" of the clock ticking on all of the remaining components in the old TV.
If you have a splattering of dead pixels the only fix would be a replacement panel. If it is even available the cost would probably exceed that of 2 new Panasonic VT50's.
Time for a new TV, 1080p, 3d if you care, digital tuner, lower energy consumpsion, latest technology and all new parts. Fixing a 7 year old TV leaves you with a new part and a bunch of 7 year old parts doomed to fail.
Just my advice.
Sorry to hear about your problem. Been there myself.

If you know electronics and have a good multi-meter, you may be able to isolate what board is causing the problem. Once properly diagnosed, recycled replacement boards are relatively cheap from various sites on the internet. With a little luck and help from a friend, I was able to replace the power supply board on my 2005 Pioneer Plasma for under $80. It as good as new and I hope to get another 5-7 years or so out it. I had an estimate of $359!

Here lies the problem with modern AV electronics, especially flat panels. Unless you can fix yourself, its always better to buy with replacement new. In my case a 50" 720p plasma was $359 to repaiir or spend $500 on a new 50" 1080p plasma. No brainer.

If you do go new, check your local craigslist for scrappers that search out broken flat panels. They do this to pull the boards and resell them to DIY'ers. Often they will pick up and give you a few bucks too. Good luck.
Post removed 
LCDs and Plasmas are generally not worth being repaired -- unless it was a premium Plasma like the Pioneer Kuro. Given it's a Philips Plasma at 50", you can pickup a Samsung Plasma at 51" for approximately $500 which will give you better blacks and a better picture than your legacy philips plasma. Repairing your Plasma will likely cost you at a minimum $350++ So not worth it.