One Cord To Rule Them All


I'm seeking advice for a power cord to go from the wall outlet to my PSA P10 power regenerator. It needs to be 1.5M / 5 ft. and have the ability to pass 600 watts for many hours per day. My current PC is a Pangea AC-9, and my budget is about $200 to $300. The candidates I have so far are: Pangea AC-9 SE Mk ll, Audio Envy Ocean 3, or a PS Audio AC10 (used for about $300). Any thoughts? ... Thanks
koestner

Showing 13 responses by koestner

Jetter, I felt the same way, but PS Audio even says a better power cable will sound better?? So my quest for a better cable has started. I also just discovered that Audio Envy has a Mega 3 Power Cable that uses more conductor material for higher current applications. A 5 foot cord is $306, so still within my budget (if I can ignore the $6). Has anyone got an opinion on this Mega cord?
MC and TJ:
600 watts I think is about correct as the P10 says the system is drawing 420 watts at idle (my 2 mono amps idle at 150 watts each). Now the P10 runs at about 66% efficiency so 420/.66 = 636 watts. If it goes from the wall into the P10, then yes it is passing the watts through the cable. Watts are Voltage x Current and about 600 watts are passing through the power cord while my system is running.

I was thinking of going to a solid core cable instead of stranded, but keeping within my budget... any chance?
Lalitk: You are exactly right. I should find out for myself. I think the Mega 3 is the one to try. Plus there is a 45 day trial. Since this is my only hobby, I can, and should, try it out.  Thanks to all, except that guy who kept "schooling" me about the watts. :-)
Well, it looks like there are 2 camps here. One says keep what I have because before the P10 "wire is wire" and the other half thinks it all matters. Just for the record, it is a dedicated line with a SR Black power outlet. I was tempted to get the Audio Envy Mega 3, but this ongoing discussion has me undecided. I guess like all "hi-fi" there will be forever disagreements.
The title was meant as this one cord will carry all the AC for all the other cords in my system. It will go from the wall to my re-generator.
What about Anticables? I’m not trying to come up a rebuttal, but they’re in my price range, and also solid core I think. I don’t know about them being UL listed though.
Yes, it helps. I don’t want to spend $300 just to feel better without it sounding better.
I don't want you guys to think I'm an OP deserter. I am still here and reading these posts with great interest.
Miller, 

if you are asking me to hear your system, I am happy to visit if you are somewhat nearby. I am in Florida. What state are you in?