Klipsch LaScalla "upgrade"?

I can only speak for the 4.2's but there is such a difference I will keep them for a while longer.

Dean is one of the guys who does many others like Klipschorns LaScalas and RF7's to name a few.

How do those tweaks and upgrades compare with the stock unit?

For instance, would everybody recommend doing this tweaks on the La Scala, or simply buy an stock Klipschhorn instead?

Thank you

Mike,

I was just looking up some modding suggestions on the horns & realized I sent you to the wrong post for suggestions

Try this one:

Klipsch speakers, be honest

Y Mac,

Sean is an electronics guy here at the Audiogon Forum...

At the Klipsch link provided scroll down little over 1/2 way and there will be Dean G. who just finished my 4.2 crossovers.

Someone I know just bought this kit from Bob Crites. He is quite happy with it, paired up with a 300B SET amp. La Scala mids & highs and bass response apparently down to 30Hz. Write Bob, and he can quote you the kit prices.

http://forums.klipsch.com/idealbb/view.asp?topicID=54990&sessionID={8729C199-1106-45B7-AA7B-377B2344F858}

You might want to check out the thread found through the link below...LaScala upgrades were discussed quite a bit by Sean & others.

Klipsch love them or hate them

Thanks for the suggestions. By the way, since I am new to this forum, who is "Sean" and does he have an e-mail where I can contact him?

Thanks again.

Mike.

Go to www.klipsch.com there is a forum with a wealth of information. Plenty of Klipsch owners who have done mods & tweaks.

last month's edition of audioXpress mag had an article on upgrading the tweeter in the k-horn. the upgrade would apply to the lascalla as well, since it uses the same components, but different cabinet......don

Sean would be an excellent person to start with.

Over at the Klipsch (two channel) forum Dean G. is right now rebuilding the crossovers in my old 4.2's. He usually does the Klipschorns and others.

The La Scala can be "upgraded" by changing to one of the custom designed crossovers. I forget the guy's name who gets a lot of press for his design, check old threads or audio asylum's threads on the crossover under high efficiency speakers. Also you can have the speaker terminals made into modern binding posts and for biamp. The most common resonance control is to use rope cauk wrapped around the horns. I have put heavy speakers on the box tops which seems to help. Other bracing would get involved due to the construction techniques. While on Audio Asylum you will see all sorts of suggestions regarding who makes or made the best compression drivers, but I always felt that you might as well build your own horn based speakers if you would swap out the drivers. The woofer is very hard to access but is probably the one area where they could really benefit from change. I have a friend who told me that you should remove the back of the squaker remover the gunk in there and stuff it with felt discs. I have also heard lots of poly fill in the cavities will help. I have the cauk and the weight thats it. If you like them then leave them alone eventually the diaphragms on the compression drivers will need to be replaced.

Maybe you could start by mailing Sean directly. He has done a few things to his Klipsches in the past & can probably steer you in the right direction.