2. analog
  3. 1345479304

In Illinois, who can professionally set-up my Linn

I purchased a beautiful Linn Sondek LP12 with Cirkus, Valhalla, Ittok LVii Mk. II, new Linn arm board, Benz Micro Glider SL and original dust cover. I made a custom acrylic baseboard and purchased four spike stands for the plinth. The plinth was completely restored. I have a new belt and new suspension springs. I would like to have someone with the Linn tools and training to set-up the deck, check my cart alignment and get the most from this deck. It will likely be the last table I own as I have much invested in it and I like the sound as it sits. I contemplated a DC motor upgrade from Origin Live but opted to keep my upgraded Valhalla power supply. I went through the board and replaced all the caps, wire-wound resistors and did the diode mod as well as replaced some film caps. It does well.

I know there are some Linn dealers in Chicago but I am in Central Illinois (home of a Big 10 institution with Orange and Blue) so someone more local? Someone that will show me what and why they are doing what they are doing?

Any suggestions would be appreciated. I figure as much as I have into this deck (relative - to me, anyway) I woul dlike to have it professionally set-up and tweaked for the optimal sound quality.

Thank you in advance,

D
analog_source

Showing 2 responses by polk432

polk432
1,142 posts
 
I hope you find someone locally, but you really can DIY. Just take pics of the bottom of your TT put them onto your computer and reverse engineer. Leveling the springs is the hardest part. It just takes time. 95.00 per hr and usually a 3-4 hr job. If you did what you've mentioned above you can rebuild it yourself and if you really want, have someone tweek the cart. I have 2 top plates, a sub platter and a beautiful custom plinth that I no longer use, but would rebuild another without thinking twice about it. I'm glad you kept the Valhalla. Best of luck.
polk432
1,142 posts
 
Hang in there. I'm not one that beleives in tweeks. When you install the steel top plate make sure the upper left hand corner in the back does not buzz when you tap it in the corner. You paid MORE than enough for your deck, and it won't sound any better than if you rebuild it yourself. Just take your time. I've had an all Linn system, and I'm not knocking them, but you have most of your problem solved in your wisdom of their hype. That's what sells and gets them retail prices. If you need any help or pictures and instructions, let me know. I'll leave you a phone #. I have pics on how to rebuild too if you need. Good luck, and remember, you can do it.
More to discover