rich121
Responses from rich121
| Notice That There Are Not Many Survivors of the MC from the early 19080's or so? Love the Fidelity Research FR1-MK3F cartridge, which, I have (4), of which, (3) are NOS and (1) has been re-tipped by SoundSmith and still have yet to mount it. Also really like my Fidelity Research MC201 cartridge, also re-tipped by SoundSmith an... | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand @lewm As whart observed, the tonearm is a Clearaudio TT2, I must have misunderstood and he built the plinth only. | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand @whart "Arm looks like a Clearaudio TT2" Yes, you are correct. I must have misunderstood and that he only built the plinth. I should be ok with a heavy plinth as the floor is concrete and I plan using a Vibraplane 2210 isolation platform I boug... | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand https://1drv.ms/i/c/8cf48ea5b02da5ea/IQCRNLf-Vo4FTbsMufSLsSS3Ac_Ts7XlURlUu1xrxNMu2QU?e=LjEsAR | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand https://1drv.ms/i/c/8cf48ea5b02da5ea/IQAf_df-9dHtR4PYxeNWPSk8AToPgH34CbD-3GCmSWUvqJI?e=Pnq5Ov | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand Not good at posting pics. Here are some pics that show a 'naked', motor only SP10 MK3 mounted in a plinth built by a an engineer acquaintance, used stainless and brass, even built the tonearm: http://1drv.ms/i/c/8cf48ea5b02da5ea/IQAnc28SQGSbQ6y_9j... | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand @elliottbnewcombjr Did you notice any audible difference made by the addition of the acrylic? | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand @atmasphere The escutcheon and the outer/bottom body of the MK3 are also Al, but obviously thinner. The ultimate would be to remove the motor from the escutcheon/body and mount naked, which a couple different aftermarket plinth manufacturers have... | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand @lewm Lew, what I was thinking, but even though Al is not nearly as dense as cast iron or brass, wouldn't it be better to keep with the same type material to avoid 'smearing'? | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand Lew, great catch! I just measured my SP10 MK2 factory plinth (MK3 still boxed since JP Jones/Fidelis Analog did all the upgrades) and found that the top of the factory arm board sits 3/8" higher than the bottom of the SP10 MK2 escutcheon, which wo... | |
| New aftermarket plinth for Technics SP 10 MK2/MK3/R from Acoustand @atmasphere | |
| Best tube amp for Wilson Watt/Puppy @daytrader "are you selling stuff or helping? Reading comprehension issues? My post was clear. | |
| Best tube amp for Wilson Watt/Puppy @jdeitch What did you end up with for amplifiers for your Watt/puppies? I'm also considering getting a pair of Watt/puppies and hope I don't have to also spend on amplification. I have a pair of Quicksilver V4's, which are the 170 watt, KT170 ve... | |
| Where to find record cleaning platter? @ticat What I'm looking for is specific for hand cleaning records and is already manufactured. | |
| Where to find record cleaning platter? Thank you for your response and information, it is appreciated. What I am looking for is just a platter on a spindle/bearing for hand cleaning with separate brushes, cloths or whatever is needed for the particular record. It would sit on a shelf ... |