I can't imagine why anyone would want to add the aux. mids to the 1530, which is great speaker as is. However, contact Richard So at: [email protected]. He has all the info you might need, as he bought up all ADS' stock when they moved to the West Coast and has a lot of knowledge and parts for ADS speakers.
Upgrade A/D/S L1530 midrange to L2030?
I am looking for help adding auxiliary mid's from L2030 into my L1530's. I need to know how the aux. mid's are wired in the 2030's (parallel, series or?). In operation are the mid's switched in all at once?. Does the main mid still operate when the aux. mid's are switched in? Can anybody help with a schematic, parts list, or pictures of L2030 crossover? Since both speakers use the same midrange and tweeter, and the crossover points are the same I should be able to emulate the crossover taking in to consideration the different woofer impedance and output.? Any help with any of these issues would be appreciated.
- ...
- 4 posts total
Kcdat, You can also contact Richard at [email protected] He runs lots of ads on Ebay, category a/d/s in Consumer Electronics. Alan |
Don't even consider trying to do this. not only will you end up with a butchered pair of 1530s that will probably be worse for the effort (and likely worthless), but the likelyhood of finding L2030/1530 mids is slim... and they should go to people who need to replace blown drivers, not to some bizzare franken-speaker project. Enjoy the 1530 as it is, it's a great speaker. if you need a 2030, find a pair and buy them. you can't make a 1530 into a 2030 no matter how hard you try. Frankly, it also sounds like you lack the technical skills to really do this right in any case (presuming it was a good idea, which it's not), thus it is to be doubly avoided. |
- 4 posts total