2. amps-preamps
  3. 1321298285

Best Amp for Parasound JC2

Hi,

In my other thread I asked about the JC2 vs Aesthetix Calypso vs Ayre K-5xe. I intend to get the Vandersteen 2CE Signature II or the Harbeth 7 SE. I also auditioned the Totem Mani 2 Sig. which has a remarkable bass.

Now that I've settled on the Parasound JC2, I'm seeking the best used amp ($2-3K)range to match the JC2. Parasound JC1 monoblock is an obvious option but they're on the expensive side and too big in size (one for each channel) and I don't need that much power to drive the speakers.

How about the Ayre V-5xe stereo amp? It has the same inupt impedence (100 Kohm) as the JC1.

Anyone used the Pass Lab X or XA 30.5 with JC2? The input impedence is not matched on paper. Any other recommendations? Tube amp?

Thanks.
r0817
jdub39
486 posts
 
The JC1 and A21 are designed by John curl and is a beautiful sounding amp! John also recommends silver fuses! I put a HiFi tunning Silver Star in my A21( on the main fuse line) and it took a nice performance leap into a new category. The XLR inputs do sound better than the rca and is recommended by Parasound they yield more refinement and and better sound stage!

hope this helps!
r0817 OP
55 posts
 
Jdub39,

Thanks much for the info. It's good to know the A21 is designed by John Curl, hopefully pursuing the level of refinement with a lesser power.

What's the pricing point for NEW and Used A21? Does it come up on Audiogon often?

Thanks again.
jdub39
486 posts
 
They do come up here on Audiogon for around $1300 to 1700, New there around 2100 to 2300. Yeah the A21 and JC 1's are the only two recommended and touched by Curl.
salmonsc
66 posts
 
Check the Parasound site for Curl's involvement in design if that's impt. to you: JC-1, 2 & 3. A-21, 23, 51 & 52.
r0817 OP
55 posts
 
Anyone used the Parasound JC2 with Ayre V-5xe stereo amp? The V-5xe has the same input impedance of 100K ohm as the Parasound JC1.
More to discover