Peamp/Amp for Thiel 3.7

I auditioned them with a Classe preamp and Mac monobloc amps. The room was heavily damped. I like the idea of the BAT option. I was thinking about the Vk51se/600se combo.

Teeshot...if you look at Yyz's threads and check out his "Forward Speakers that Rock" thread, he posts a alink to a review of the 3.7s done by James Tanner (VP of Sales at Bryston) who basically describes the 3.7's tonal balance as being very neutral (meaning no emphasis of any of the frequency bands). And in this link he describes that if you have the 3.7s in a room that has a low freequency suck out (i.e., it dissipates the low frequency information at certain frequencies) than the speakers will sound a bit thin (as more of the mid/treble region is coming through). The fix therefore may be as simple as experimenting with speaker placement. Furthermore, you could also look at acoustic room treatments that could address bass suck outs. Just a thought. I do agree though that you will need a lot of high quality power and look for an amp that doubles its output as the impedance is halved, as the 3.7s do dip down to 2.4ohms at 125Hz (according to Stereophile's measurements), while Thiel's website states the minimum impedance hits 2.8ohms. The Primare A32 puts out 250wpc into 8ohm and 400ohm into 4ohms (and ? @ 2ohms...no info on their website). So this may also be the issue as well. Just some thoughts. Good luck.

I'd start first with Krell, and then second with Pass.

McIntosh mono amps
McIntosh preamp

and listen to the latest Krell

The 3.7s when feed the right electronucs will come alive and blow you away

For SS- Pass Labs.
For tubes- CJ or Aesthetix