Doge 8 or YS A2 or Jungson J2?


Looking for a line stage preamp with remote volume and source selection, and these look pretty good for the money. I can't find much by way of reviews through Google, so am hoping some of you have impressions of these units, or just of the manufacture or sound quality of these brands. The only recommendation I have received so far is for the Doge. I need a 230V version and each of these can do that.

Thanks for any insights.
redkiwi
Redkiwi: please get back and say what you think about the Doge 8 if you buy it, i will probably buy a pre-amp myself around christmas. and i have been looking at the Doge myself, so it would be great to hear what you think about it before i decide.
For what it is worth, my Doge 8 is beginning to really break in, thought I'd post a couple observations in case anyone is interested. First of all, I have to be honest and say that the NOS tubes recommended and sold to me by Pacific Valve didn't blow my hair back and in fact I actually preferred the stock Chinese tubes that come with the unit. They gladly took the NOS Jan Phillips tubes back and kindly refunded my money. All in all, Pacific Valve has been very good to deal with and Vic knows his stuff. I enjoy reading his opinions and musings. I replaced the stock tubes with NOS Matsushitas in both the line and phono sections, those purchased from Andy Bouwman of Vintage Tube Services. Andy has never sold me anything but excellent tubes, every time. After listening now for several weeks my opinion is that the Doge 8 needs break-in time. It is a little bright sounding to begin with. Now, with break-in, it has settled in nicely. The highs are still there, as clear as gin, but without the edginess most of us try to eliminate from our systems. This unit has unreal frequency extremes; the bass is just excellent, really deep and taut, very musical. Vic refers to the midrange as "lacking the usual midrange muddiness associated with most tube pre-amps" and he is exactly right. This thing is so open it is incredible, I've never heard anything like it. There is NO veil, it is completely transparent sounding while retaining musicality and rhythm. Cohesive from top to bottom with the clearest midrange I've ever heard. It "sounds" like an open window into the music. This observation refers to both the phono and line stages of the unit. This thing is really worth a try, given the price it is a great value.
I just ran across a Doge 8 review in Arthur Salvatore's High End Audio website. Its at the top of the class B section below a $36,000 Jadis preamp! Heres the link to it:

http://www.high-endaudio.com/RC-Preamplifiers.html#ClB

Its not his review but some associates that really rave about the sound and build quality. Other than that and this thread there is not very much information. This preamp seems like a bargain at $1,300 USD. Pacific Valve has these on back-order at the moment so they must be selling well. Has anyone tried the MM section of the phono stage and if so what are your impressions?
I've had a Doge 8 for about a month now. I would agree with the posters above that it's pretty hard to beat for the price, based on features alone: It's a tube preamp with built-in MM/MC phono stage, balanced outputs, nice remote control; heavy, with very high build quality. If this were not a mysterious Chinese brand it would retail for 2X-3X the price. I agree that there is frustratingly little information available on the web, so I'll try to give a few general impressions here.
First of all: I would buy it from Pacific Valve as opposed to a direct Chinese source, mainly due to the QC that they do on each unit, and because they warrant the product in the event of difficulties. I also think that some Chinese gear can have different parts and specifications depending on the source – the PV gear will be consistently high quality.
I am currently using the Doge 8 with a Cary 120S (used mostly in UL mode), powering Magnepan MMGs (soon to be modded). I’m using the balanced outputs (although I couldn’t hear much difference between them and the RCAs). The preamp features two single-ended outputs; one Chinese website says that they have different gain levels, but I cannot hear any difference.
I am also using a Cary SLP98F1 with the 120S, which gives me an opportunity to compare the Doge with the 98. I won’t say that one is better than the other; they both have different sound signatures. The Doge is more transparent and less tubey-sounding; as one reviewer says, it sounds like a smooth solid-state preamp (whereas the SLP98 sounds like the tube preamp that it is). The Doge has a slightly stronger overall presentation in this system due to its clarity and lack of coloration across the spectrum, but the Cary has slightly richer bass and a more accentuated midrange. I vacillate in terms of which I prefer with the 120S/Maggies combo; they are different experiences. The Doge retails for less than a third the price of the Cary, however. At some point I’ll sell one or the other (I buy and sell gear a lot); I’m not sure yet which one it will be.
The phono section comes with two switches, one for MM/MC and the other LR/HR (low resistance, high resistance? Presumably). The manual is no help in determining what these settings correspond to in terms of gain, load settings, etc. In fact, the manual actually advises users to not worry about the measurements, use the settings that sound best – advise that might be great for some but not for a nervous-nellie audio hobbyist like me. I found the MM setting to be too low-gain with the cartridge I am using (an Ortofon 4mv moving-magnet cartridge). The JFET-driven MC setting is too high-gain, and I assume the load settings are “wrong” on MC for my moving-magnet cart, but there is no way of knowing, and it sounds great – extremely dynamic. The LR/HR switch sounds terrible on LR with all the carts I tried, so I use the other setting. Verdict on the phono stage: It works especially well with a high-output MC cart and/or if you don’t mind not knowing at exactly what settings you are operating; otherwise you might prefer using an outboard phono stage. The line stage sounds so wonderful that the phono stage can be considered a bonus.
Bottom line: I absolutely would recommend the Doge 8.
I received my Doge 8 about 2 mos ago. I needed something to drive my tube power amps which are 2 highly modified Cit II's and a highly modified st 70. These amps require a fair amount of input voltage to reach rated output. The Doge has a robust output and is a great match for these amps. I agree with all the reviews Ive read on this pre and in particular with Salvatore, http://www.high-endaudio.com/RC-Preamplifiers.html whos opinion I dont always agree with. I would add that the mc step up sucks but I am using an sut into the mm input and it really sounds good. I initially purchased this pre as a temporary fix while I decided on and acquired what was hopefully to be my last pre. I have been able to borrow a few nice units to try out since buying the doge and have yet to find something I prefer. A few improvements would be a tape loop, balance control and either get rid of the jfet step up or at least use good ones. This pre is easy to recommend because whatever your expectations are, at its price point it will surely not dissapoint and will be easy to sell. In my case I was (am) ready to spend $7-8k and have yet to find something up to that price point that significantly improves on the Doge. I must add that the first thing I did was replace the tubes and after trying a few different types I settled on tele ecc 801s for the phono and tele 12ax7 smooth plates for the line stage. Depending on your system this pre is a real value. ( I did have the added cost of tubes and sut)