DK Design VS.1 Reference mkII - Optimization


I would like to know what tuning, customizing, hot rodding, tweaking, what ever.. that you owners of DK Design VS-1 MK2 are using to bring out the best in this amp. It seems to be responsive to changes in interconnects, tubes, power & speaker cables, speaker dynamics, etc. most probably to both the positive and negative.

Please share your work. I would like to know what improved it's performance, what caused no real change and what made it sound worse. Thanks in advance!
jomoinc
Tvad, What is needed is a magnetic cover - that will absorb those electro-magnetic waves and they won't just bounce about in the amp. If you don't believe in electro-magnetic waves or fields just look for the Aurora Borealis. Maybe there is a look alike in the amp that only appears in the dark. ROTFLMAO, but not at you. :-)
Post removed 
Work in progress....My speakers don't really allow me to turn up the volume much past the 9 o'clock position with out involving the neighbors and I also noticed the lack of heat produced and decided to try something to see if it improved the performance. In the past my MC275 tube amp sounded ok at lower levels but really started performing at the higher volume levels. Anyway I have a sony cd with an adjustable output so I simply dropped the input signal and cranked up the DK to the between the 11 & 1 o'clock positiion to see if hopefully it works a little better. I think I may be on to something.....
Does anyone have any info on what the pots on the preamp board relate to? I remember reading something about the adjustablity of the input...
The meter is not as entertaining but I am thinking at this point that it sounds better.....
Tvad, I am telling you the amp sounds better with the aluminum cover off. In an industry where people use little pebbles, roller blocks, and expensive power cords I find it surprising that you should have difficulty accepting that the aluminum cover degrades the sound of the amp while a Lexan cover does not.

Also, while aluminum is non-magnetic it still will bounce more of the EMI then a Lexan cover will. If you shoot an electron into an aluminum plate the results are very different then if you shoot an electron into a Lexan plate.
Post removed