Subwoofer for Magnepan 1.6?

I like the Sunfire mk 2 with my MMG's. You just have to point the passive radiator toward the corner (usually it'll be right against one room corner, behind the speakers), turn the volume on the sub way down, adjust phase (takes listening and testing for quite a while), set crossover to about 40 Hz, and you're done. Using it in the 12x15 foot converted bedroom with the Maggies is very fun, and with proper ASC treatment, is better than many speakers costing between $10,000 and $20,000. Cheers...

my local dealer has the vanderstein 2wq sub set up with the 1.6's.they sound wonderful and the way vanderstein does his crossovers for subs[the x-over goes in before the amp-it lowers the set freq's around 10-15 db-the amp then does'nt have produce high volume lower freq's-but the speaker is still playing full range so it reacts totally normal,but is also cleaner for not having to produce hgh volume lower freq's.]then te sub is run speaker level input so it picks up your amp's signature. it matches up seamlessly and with the q control you can adjust near perfect for your room.

hi, it's not an easy thing to do right, unlike dynamic speakers, wich when proper equipment is used can sound quite good and "real"...the ribbon is an extremely fast driver...i have had the 3.5r in the past with a pair of large vmps subs and a bryston xo.....i could get close but never quite like it should....your case would be of greater challenge....simply because you would have to cross slightly higher than i did(40hz@12db)....you might consider a pair of sue subs with a pair of paradim xo30....it's a kicking value......and it has the adjustable phase....the phase adjustment is of extreme importance....well good luck..rehan

A friend has a pair and we recently tried them with the Janis W1 sub, phenomenal!!!, I have also heard them with REL subs.