Quite a few of the recordings are out-of-phase anyway. The easiest thing to do is to use the phase inversion switch in your pre-amp, just toggle it and see whether you can hear a difference. I do that all the time. There is no need to change any cable connection.
Polarity with SCD-1
I was just reading the review of the SCD-1 in Stereophile.
It states that there is a problem with the absolute polatity when running balanced that will need to be compensated for by reversing the speaker leads.
I have an all Krell/B&W system, with electronic crossover with quad wired speakers.
Is the above true and what does it mean? Has anybody out there dealt with this (problem)? Would pushing the phase button on the preamp solve the problem.
Thank you,
Richard
It states that there is a problem with the absolute polatity when running balanced that will need to be compensated for by reversing the speaker leads.
I have an all Krell/B&W system, with electronic crossover with quad wired speakers.
Is the above true and what does it mean? Has anybody out there dealt with this (problem)? Would pushing the phase button on the preamp solve the problem.
Thank you,
Richard
- ...
- 8 posts total
- 8 posts total