Cleaning Phono Stylus- white residue


I have been an audiophile for many years but I am just a novice with analog. I have been using a Transfiguration Axia cartridge on a Vector 3 tonearm. I was wondering about the best way to clean the stylus. I have been using Record Research Lab LP#9 liquid stylus cleaner with brush. Although Transfiguration recommends holding the cartridge vertically, the Vector does not have a removable head shell. As such I've been gently taking the damp brush and moving it forward over the stylus. Recently I looked at the bottom of the cartridge near the stylus and noticed a white residue?? I'm wondering if this residue is related to the liquid cleaner and also hoping I didn't get any liquid into the cartridge mechanism. I read about using a dry Mr Clean Magic Eraser, lowering the stylus onto a small section of the eraser, and abandoning the liquids. Any advice from experienced analog lovers is most welcome! Thanks in advance.
audiobrian
Thanks for all the helpful advice gentlemen!
Need I clean the bottom of the cartridge (white buildup Kiddman states is vinyl dust from the record grooves) or just leave it be?
What type of magnifier are you using....I know my eyesight isn't good but I can hardly make out the stylus with 5.0 readers....I find it difficult to avoid the cantilever when cleaning with a dry stylus brush.
Does anyone use the long bristle brush included inside and built into the cap of the RRL or Mobile Fidelity LP#9 liquid stylus cleaner, to clean the stylus?
Thanks!
Brian- even a cheap jeweler's loupe should give you the magnification you need. You can buy one on Amazon. I'd keep any liquids away from the cantilever, cartridge underbody or suspension. If you have a dry brush, like a small painter's brush, see if you can't remove the dust from the cartridge housing using that; then use one of those stiffer stylus brushes (or ME, if you are inclined, but I'd dip, not scrape~ you should read up on using ME as a stylus cleaner before you deploy b/c it is basically a bunch of tiny fibers and you don't want to snag your stylus/cantilever in it and you still need to brush afterwards to remove any residue from the ME). I've gotten away from using liquid stylus cleaners and just use dry methods, but each to their own- Lyra obviously believes they are ok, and I used its stylus liquid when I ran their cartridges without a problem. I never used the RRL liquid- one concern I'd have is if the stylus is already dirty, whether applying a liquid to it would make it worse. I guess you should take a close look and try some dry cleaning first, in any case, no?
Man, do I have a tone of it right now, the result of months. I only clean it when the cart is out of the arm, sitting upside down, under bright light, with a tiny brush and toothpick with alcohol on it, very carefully!

I do not use usually use liquids on stylii, I do not use those sticky things, just the little stylus brushes with some alcohol if something on the stylus is stubborn. After 1000 hours the stylus still gleams under 400 power magnification, so my occasional brushes with the stylus brush, and very occasional use of alcohol on the short stiff brush (as opposed to dripping liquid on those longer applicator brushes) is sufficient. And safe!
I use liquid very sparingly..maybe once or twice a year. I use a combo of a traditional stylus brush, ME for serious cleaning. I use Onzow every record change(after two sides). If you keep up with regular cleaning, crud will not build up. I use liquid via a drop or two on a flat stylus brush and do my best to avoid the cantilever assembly the few times I use it throughout the year. A 10x loupe is useful for checking the cleanliness.