Silver vs cryogenic treated copper

Thanks .. I think I am actually trying to get something more scientific or meansurable. I believe silver has lower resistance than copper. However, crygenic treatment change the crystal structure which also lower the resistance ( I think ). Maybe my question is ... which one has lower resistance, silver or crygenic treated copper?

That was easy, just google it:
"

Cryogenics changes the way current flows in a conductor. Aluminum, brass, copper, tin, and lead used in the electron- ics industry are affected by cryogenics. All of these materials exhibit longer wear, and more durability, but they also exhibit a better conductivity rating. When these materials are in the molten state during the metal-making process, as the solidification takes place, some molecules get caught in a random pattern. And we know that molecules do move about at sub- zero and deep cryogenic temperatures, albeit slowly. Liken it if you will to water freezing or crystallizing as it turns to ice. The molecules move to form into a tighter, realigned pattern. Upon returning to room temperature, the molecules stay in this new relationship, producing less random, more even spacing, which in turn reduces the open areas between the grid matrixes to one another. The resulting product exhibits a better electrical current flow. It also strengthens solder to make their joints stronger and less subject to lifting. The printed circuit board material itself loses the stress it has, which helps the board last longer and puts less strain on component parts. The increase in conductivity has been measured between 5% and 10%. This helps cabling, wire, solder runs, and transformers to operate more efficiently."

No

Thanks for the reply, but your quote is the explaination of the term cryogenic treatment. It didn't say how is it compared to silver. I tried google it, but can't find any specific number, of it stated specifically that silver has lower resistance or lower impedance than cryogenic treated copper, or vice versa.

As has been stated, It's all in the ear of the beholder. More important than the actual metallurgy is the geometry of the conductors as well as the dielectric materials and their interaction. LCR parameters are affected more by the cable design than the conductor material itself. The difference in conductivity of silver over copper is relatively small and if the silver is alloyed with something else, then the difference is even smaller. I personally have a strong preference for copper over silver, but that's just me.

Two things I have noticed:

1. Typically all pure silver wires I have heard till date alter the tone and timbre of the instruments.

2. Cryogenic treatment of wires also makes the sound tad dry and lifeless, less micro details as well.

I am waiting for at least one exception.

I apologize if this was not very helpful for the original poster but since both the things are related to un-musicality so I could not resist writing it.