All power cords are Shunyata Annaconda Helix vx.
Dedicated 30 amp line into a Furman IT 1220.
A Hydra 2 for the power amps.
The last two( or the first two, depending on how you look at it)wires are my Ic and speaker wires,my speaker wires are soldered direct to the Tannoy crossover,but a captive wire of unknown quality takes the signal to the tweeter and woofer sections.
Cable debates go on forever, I'm not trying to change anyones mindset.
You believe what you believe and experience what you experience.
My experience is that the sound is more unified with the new cable runs,why this is so is just speculation on my part.But that's just human nature, trying to understand why.
But it is rather more common sense than theory to assume that if two wires are of identical contruction and material that they will share similar sonic characteristics.
More similar than cables made from unlike substances,designs and wire thicknesses.
In my universe I believe all cables have their own Sound,all wires have their own sonic characteristics.
To avoid all the sonic variables inherent in mix and match,it makes sense to me to keep as much of the wiring the same.
To rewire my whole system and hardwire everything with the same exact wire,from panel to driver would be the ultimate fruition of this.
Dedicated 30 amp line into a Furman IT 1220.
A Hydra 2 for the power amps.
The last two( or the first two, depending on how you look at it)wires are my Ic and speaker wires,my speaker wires are soldered direct to the Tannoy crossover,but a captive wire of unknown quality takes the signal to the tweeter and woofer sections.
Cable debates go on forever, I'm not trying to change anyones mindset.
You believe what you believe and experience what you experience.
My experience is that the sound is more unified with the new cable runs,why this is so is just speculation on my part.But that's just human nature, trying to understand why.
But it is rather more common sense than theory to assume that if two wires are of identical contruction and material that they will share similar sonic characteristics.
More similar than cables made from unlike substances,designs and wire thicknesses.
In my universe I believe all cables have their own Sound,all wires have their own sonic characteristics.
To avoid all the sonic variables inherent in mix and match,it makes sense to me to keep as much of the wiring the same.
To rewire my whole system and hardwire everything with the same exact wire,from panel to driver would be the ultimate fruition of this.