how do you level a turntable?

Depending on your stand's legs, but many can have a threaded foot retrofitted. If hollow steel square tubing is used most Ace hdwe stores have adjustable feet that will fit. If there are wood legs they can be drilled and have a metal threaded endcab/footer installed.

hello glenn could you email me directly [email protected] re. the erato pre? thanks dan

It wasn't cheap, but I had my Thorens TD-166 Mk II modded by a local guy. He removed the stock feet, and replaced them with threaded bolts, terminated with rubber balls glued into inverted cups, which act to absorb vibrations. I now have a couple of inches of adjustable leveling range, which I need due to my very uneven basement floor. Email me if you want info on this modder - he is in New Jersey.

Get some shelf brackets or I used some old steel speaker stands cut up with lag bolts into the wall studs. Put threaded screws through the brackets, a piece of wood or porcelain and adjust away. Will sound much better. Pro-ject makes a wall bracket shelf like this that is adjustable for $160.

Make sure your 3/4'' mdf shelves aren't warped first. You'd be surprized. Run a level across them first.