Azimuth and the Fozgometer


Finally received the Fozgometer after a 2 month backorder. In the past I have always used a loupe and a front surface mirror to set the azimuth on my Tri-Planar with Dynavector XV-1S cartridge. According to the meter, I was very close to a correct azimuth. I wasn't prepared for the effects that a very slight adjustment would make. Nailing the azimuth has brought my soundstage into tight focus. I have never experienced this kind of solid imaging in my system.
I know that the $250 price tag is a bit steep for something that won't get a lot of use, but this is not a subtle improvement. There are other ways of measuring azimuth, that I am not very familiar with, but I would doubt that they are as easy to use as the Fozgometer.
128x128czapp
What is this "Feickert alignment service"?
Some dealers provide setting of overhang, offset angle, azimuth, etc. using various tools including the Feickert Adjust Plus software, with analog purchases and/or as a separately available service. I am one, but there are others listed on his website.
regarding the Fieckert software; Michael Fremer has done a seminar with Dr. Feickert at RMAF the last 2 years that i have attended. he showed graphs of how this software shows how the best crosstalk position compares with the best phase angle position with azimuth. it would be a coincidence if they happened to be the same.

info on Feickert software
I printed out the manual for the Fozgometer (thanks Nsgarch) after a bit of figuring to keep the pages in proper sequence -- first page blank on back side, then remaining pages back to back for 2/3 and 4/5.

It all seems pretty simple but I have a question about the inclusion to measure channel balance -- what is the value of that? Once you've gone through the procedure to set azimuth you're not going to change anything to adjust balance.

I can see where this would tell you if your aggregate balance of cartridge and phono stage was correct or not, but you can do that with a multi-meter. So, is there another purpose I'm not thinking of?