2. analog
  3. 1212460141

Alignment Snafu? Or?

Hello all, I am about to order another Protractor, this one an Arc Type from Ken Willis over at the Asylum.

Ken has asked if my arm was at 210mm, or 211mm Spindle-Pivot Distance, and taking an actual measurement this evening, I actually find out my arm is mounted at 212mm. So, may I ask what should he make this Protractor for, 212mm? Or no? Will 1mm make a critical difference in accuracy, and sound? I will forward this info to him as well, and see what he says. More input, and advice is of course better. Thanks, Mark
markd51
markd51 OP
761 posts
 
Just wanted to add, the suggested Spindle-Pivot distance for the AQ PT-8 Arm is supposed to be 211mm. Mark
gregm
3,395 posts
 
MArk, it's important to know the exact spindle-to-pivot distance this arm was designed for. It's part of the overall geometry.
If you're sure it's 211mm, then align to 211. Regards
mjglo
127 posts
 
I think you want the protractor made to your actual mounting distance and adjust overhang accordingly.
narrod
1,064 posts
 
My documentation shows a spindle to pivot distance for the Audioquest arm of 210mm.
More to discover