K&K phono stage

I have listened to it and it does sound wonderful. I gave it serious consideration but when it came down to it, didn't trust myself with a soldering iron. Of course, I think you can get Kevin to build it for you at an additional cost.

I ended up going with a EE Minimax Phono which is excellent. There are numerous reviews around and you can check it out on morningstaraudio.com

Mike
Good luck!

Building the K and K Phono Stage was a great experience for me and I would highly recomend it to anyone. The unit sounds fantastic and is a bargain considering what a comparable unit would cost. I am a first-time kit builder and was apprehensive about taking on such a project. When the kit arrived and I opened the box it certainly looked overwhelming to me at the time; however, I decided to give it a go and have been listening with a big grin on my face ever sense! Kevin's directions are very good and he includes a CD with pictures to nurse you along and through the process. I set myself up on a dedicated table with my labtop and looked at the pictures as I proceeded with the project. I made a couple of calls to Kevin along the way and he put me right back on track and was very helpful. I can't say enough good things about the help and service Kevin gives. I highly recommend you pick up a good soldering station (about $150 or so) at your electronics store and give it a go. It took me about 26 hrs total to assemble and was told that was pretty good for a first time builder. The more you work on the unit it becomes addictive or at least did for me. Again, highly recomended for first timers or experienced kit builders and the sound is "to die for".
Good luck!
Capeman

Like Capeman, the KandK was my first kit building experience. To practice, I went online and bought a couple of cheap electronic kits at about $10 each just to practice a little soldering and removal of same before getting started on the real deal. Capeman, at 26 hours you have me beat!

Based on a telephone call to Kevin a few months ago, I believe the latest version of the kit (one analogue circuit board versus two) may be a little easier to build compared to the two board model. Mine is the moving coil version and I'm very pleased with it.

Inspired by the KandK, I built an Audio Note Dac2.0 signature and I'm really enjoying it. Like Kevin, Brian at AN Kits in Canada, was very helpful along the way.

I believe both the KandK and AN kits are incredible values. Like Capeman, I recommend referring to the photos often, especially for those of us who do not read circuit schematics.

The MC version of the K&K does not normally allow for adjustable loading, is that correct?

I guess I am confused about the MC loading thing -- if you have an input transformer, such as in the EAR and the K&K, does loading at different resistance values become unnecessary?

To answer your first question the original K&K SE has a knob on the back that let you select different cartridge load settings. For MC if I recall it was limited to 100, 300, 1000, and 47k ohms. I had Kevin take the setting for 47k ohms and set up the circuit board so I could plug in resistors to configure my own setting for this position. The new version of the K&K SE has a lot more settings for cartridge loading from what I have heard so maybe this tweak is unnecessary now.

I cannot answer your second question.