$3000 on Analog system - how to spread?


How should I spread this FIRST infusion of cash. Next one being perahaps a year out.

Ex.

Table - 50%
Arm - 15%
Cartridge - 15%
Phonostage - 20%

Or,

Phonostage - 40%
Table - 30%
Arm - 20%
Cartridge - 10%

Any sensible way to do this? What's the best upgrade path. Thanx
pawlowski6132
Part of the problem is--all of these components--TT, cartridge, phono stage, are very important. Saying that the phono stage isn't important, is like saying that your pre-amp isn't important.

Here's what I have, FWIW, that you could probably buy for 50-60% of your $3K budget: Rega P25 w/Benz Glider that I bought used. C-J EF-1 phono stage that I bought used (I suspect that the EF-1 is the best component of the 3). Again, you could probably buy all 3 now for.......$1500 maybe?

Also, IMO, there's absolutely nothing wrong with owning one component that is "better" than the others. FI, the phono stage--I could see shopping for a used C-J or ARC phono stage & spending $500-$1000 depending on the model. I spent a year (!) of research & shopping to get a great deal on my phono stage.

And don't forget a record cleaner, like a VPI, for maybe $350-$425 used.

Bottom line: There's no one right way to do this. Also, buy everything used, whether you buy a used Rega P3 with a Grado cartridge, or a slightly used P5 w/cartridge. (I'm a Rega fan).

My opinionated 2 cents, good luck!

*And, I'm surprised to hear that the phono stage has relatively small impact on sound.*
Flyingred is right, you don't "have" to spend big money for record cleaning. You can clean by hand with a GroovMaster (sic) and a modded shop vac or DIY a machine like Chris's for well under $100. You do have to clean however, and hand cleaning is very slow.

I agree with Steveaudio that having one component that's "better" than the rest usually isn't a problem, with one exception. A high level cartridge on a less adequate arm or (especially) table is an invitation to disappointment. Steve's idea to buy a used c-j or ARC phono or preamp w/ phono is excellent. You'll get great performance for the money and a time-tested design. You'll be limited to MM's and HOMC's, but on this budget that's what you should be looking at anyway.

On and on and on we go!.......
And, I'm surprised to hear that the phono stage has relatively small impact on sound. I'm glad I asked.
Says who? Ask people who know, or find out for yourself!

Dejan Veselinovic, an European audio journalist/circuit designer will bluntly tell you that the phono stage is the most important. Why? Give it some thought...he's not denying anywhere that 50% of the info is on the time domain component provided by the turntable's motion. It's because the phono stage is amplifying/equalizing extremely delicate signals which are highly succeptible to noise pollution and phase smear (good to read Magnan's website for more info). Circuit topology has a lot to do with this. I chose the Monolithic PS-1 because its circuit topology is essentially that of a Klyne, with the exception that it uses op-amps in the output stage. It pays to do good research...

***
How able/willing are you to take on a project? If so, the huge "Home Despot" thread in this forum has a wealth of information about putting an excellent analog system together at minimal cost. Those of us who tried it have been very pleased.
I suggest a galibier serac which should be out any day with a denon 103r. The total cost would be slightly under your $3000 limit.