I don’t know if 2% is risky, but I see no reason to include something that is difficult to remove and potentially can leave a sticky residue on the record surface. Polypropylene glycol is a neutral polymer and has no charge although in water the polar oxygen atoms and hydroxyl end group atoms can have a weak attraction for water molecules and other cations. I doubt that this would have a significant effect on the cleaning efficiency in an ultrasonic bath.
Humminguru Nova
I’ve assembled more or less a decent analog front end. I have a few hundred records in my collection that consists of new and old vinyl - mostly mint or near mint. Now I have been buying new vinyl recently. I use Knosti Disco Antistat to wash records - one for wash, one for rinse. The records air dry.
Would a Nova be a significant step up from the Knosti? Would it be effective with new vinyl? Any reason I shouldn’t get it?
- ...
- 71 posts total
I was researching record washing solutions and MoFi Ultra Record Wash is highly rated and is designed for ultrasonic cleaners and is recommended for Degritter. |
My recommendation would be to hold off on buying cleaning solutions. From what I’ve learned, ultrasonic cleaning machines do a stupendously good job using distilled water alone. As @ljgerens pointed out, most cleaning solutions tend to leave behind a very thin layer of residue unless you follow up with a second tank of clean distilled water for rinsing. If you’re not doing a dedicated rinse cycle, I’d personally avoid adding any cleaning solution altogether. |
@audphile1, "It only takes one rogue hard particle that gets lodged into the vacuum pad to completely ruin a record." I guess that could be a possibility, but it seems extremely remote.. I've been using a VPI vacuum system for more than 30 years and never experienced anything like that. If you've never seen how the VPT works, I assume others are similar. when set up properly the suction tube opening is set off dead center by 5 degrees. This facilitates solution pickup and minimized any chance for pressing directly down on the record. In addition there are fabric strips on either side of the suction slot. That softens any contract with the record. |
- 71 posts total

