I used some Velcro ties when I had Purist cables and they worked well, but I think it depends on your setup. I used the ties to support the cables reaching up to my amp by tying part of the cable to the rack legs, taking some weight off the binding posts.
Weight/strain relief
Hooking up some new speaker cables and I can’t seem to wrangle them to the back of my amp without causing too much strain and/or risking the spade coming off from the weight. Thinking of attaching something to the back of my rack shelf that could act as a weight relief via zip ties or similar. Any ideas on what will work well before I ramble through Home Depot for an hour?
Edit: I was able to find some 1/2” conduit 2-hole clamp which I could screw into the back of the shelf. This holds most of the weight and makes it quite secure
- ...
- 4 posts total
Hopefully your amp is on the bottom shelf. You can use cable risers https://www.usaudiomart.com/details/649424376-cable-elevators-set-of-10-black/ |
- 4 posts total