1. Home
  2. digital
  3. 196480-194409

Auralic Support

About two years ago I bought  an Auralic Aries G1.1 Wireless Streaming Transporter from Audio Advisor.  I understand that Auralic is no longer in business.  Their support site no longer exists.  What, if any, support can I get on this product? 

Perhaps one of you can answer my question.  The G1.1 sounds great, but lately it has quit streaming on Tidal after playing six or eight songs.  Then it displays an error msg" Unable to play selected streaming track.  I have determined that if I go to the Tidal setting (in the Arualic Lightning app) that I can clear the cache and the streamer will play again for six or eight songs and then the same error message appears.

I do not believe this is a Tidal issue. I havs deleted and signed into Tidal a couple of times with the result.  As well, I have a Cambridge MXN10 streamer on my desktop that is plugged into the same ethernet switch as my G1.1 and it has no problems.  Cambridge uses the same smart device interface associated with Auralic.

I suspect that the G1.1 has a firmware issue because Auralic no longer updates.  Whatever the issue, it is a damned shame that an expensive piece of gear can be so quickly consigned to the scrap heap because the manufacturer no longer supports it.  I have written to Audio Advisor for advice but haven't received an answer yet.

Any suggestions?

norcalal
calieng
203 posts
 

@norcalal 

From what you have tried you may have narrowed it down to a hardware issue with the wifi chip or some other part of the streamer hardware beginning to fail.

If you decide to replace it - I have two of the Aurender A1000 all in one models and I can highly recommend them. One bumped a Lumin U1 and Denafrips Venus II DAC out of the rotation with better sense of detail and timing.

Be careful you get a newer Aurender product to get the new software (built in Tidal Connect etc).

Otherwise Lumin has always been a good name for streamers.

Post removed 
ghdprentice's avatar
ghdprentice
9,483 posts
 

Just a question. Are you using the wifi part of the unit? If so that was one of the worst parts of the Auralic. Get a wifi extender and plug it in close (not too close) to the unit and plug into ethernet port. This will bypass the wifi and may fix the problem if it is related to wifi. And when you get a new streamer you can use it for that. Internal wifi circuits if streamers have them are generally unreliable.

Unfortunately what probably happens is there is a change in streaming services that requires an internal change in the streamer... and without support, it cannot be made. 

 

calieng
203 posts
 

Get a mini travel router or wall outlet range extender. You can set them up as a bridge fairly easily if you do not have an ethernet hard wired outlet nearby.

The small ones can be powered off the USB outlet of the device.

TP-Link AC750 Wireless Portable Nano Travel Router(TL-WR902AC)

calieng
203 posts
 

As an alternate solution - take a deep breath...

Watch the movie "Office Space". Pay particular attention to the scene where they smash the photocopier with a baseball bat.

You know what you need to do. Good luck.

More to discover