Pure Audio Project Trio 15 - Silversmith Audio Fidelium internal wiring upgrade

I am intrigued by the different wiring up grades.  My Trio15s shipped with Van de Hul CS 16 (red cable) and Van de Hul CS 12 (black cable) for the three runs between the cross over and the Voxatix AC 1.6 driver and each of the two 15 inch woofers.  I have corresponded with PAP about obtaining a loaner set of Silversmith Fidelium internal wires and it appears that they may have a set for in home trial.

I will post my impressions in the event that I receive the Fideliums..  

Thank you all again for the input and helpful suggestions.

I have the Quintet15s with Coax, and am looking at wire upgrades. I also have the Van den Hull wires. I am very curious about the Anti cables, as look good value for the price.

Yes the earlier post about having an L Pad can be useful, I had that on some of my earlier non PAP speakers. At the moment I need a bit more treble sparkle and details. My room may be affecting the level of bass, so good to try and tweak the upper ranges if possible in level, not alter the caps values.

I'll be pulling the trigger on an anticable upgrade for my Pure Audio Project Duet Horn's..... 

Question for those in the know...

-Which cable for the crossover - driver? "Level 3.1" or "New Level 4.2 Flex", or the simple 2.1 12 ga? 

https://anticables.com/speaker-wires/2-channel

And for the PAP Crossover / drivers, it seems the "Vintage Spades" work at the crossover, and the "Banana" works at the spring loaded driver terminal... is that right? 

Also, I would typically get a 1' run for t he woofer and a 4' run for the horn. Or do you recommend symmetrical lengths? 

Thanks!

Richard

Richard,

I'm curious how your Anticable adventure has gone. I am still using them(3.1 solid 12g ) in my setup, haven't found anything better so I gave up trying, lol..

Regards