Outlet is "Open Ground" - Is There Still a Safe Way to Connect to My Audio Gear?


So typically from a wall power outlet runs a very short Nordost Power Cable to Nordost's Qb8 "power strip," and then a loom of Nordost Power Cables to my vinyl audio set up  All the Nordost cables were bought used and sound great.  Having just moved and set up everything in a new room, the nearest power outlet is "Open Ground"(!)  Without moving everything around to fit the main Power Cable length to a "Grounded" outlet, please is there a safe and best sounding way to still use this outlet to power everything?  Thanks! :-)

 

 

vinylfun

So this would work for protection on a two wire outlet? Thoughts...Thanks 

Panamax MD2 2 Outlet Direct Plug In Surge - White

@motown-l  said:

I have plugged my amp into my Panamax surge protector/power conditioner. The grounding issue was resolved.

The grounding issue was resolved.

Resolved by using the Panamax surge protector/power conditioner?

Model? 

Does it use an internal isolation power transformer?

You should get the grounding issue fixed, but the only "fix" for this I know of is to use a GFCI outlet and label it with the sticky labels that say "No Equipment Ground." 

However, not ideal and most surge protectors won’t work correctly in this state.  This will however save your ass in case of a short to the chassis. 

I’d suggest you get a cheap-o 3 plug tester like this one and validate that it’s wired correctly, or not, and that the Neutral to Earth value is 2V or less.  Either of these not being true call an electrician.  You might also just want to check the outlet.  It could be the ground wire just came loose, or it might have bee your first surge strip was faulty.  Good to have around especially in a home that's new to you.  Test everything, trust nothing and maybe look at my blog for ideas on good AC for the frugal audiophile