Vinyl Care

@richardbrand There is no relationship between the specific electrical charge on the surface of a vinyl record and noise. As far as the diamond creating "static" as you people like to call it, last I heard diamonds are made of carbon which is the most conductive material known to man. Of course, at the contact patch there several thousand pounds of force per square inch combined with the velocity of that patch along with the spinning record generates enormous amounts of heat any charge generated by that action would be conducted through the stylus itself, up the cantilever to the metal cross and out through the coils to the preamp and then to ground. Superfluous! The interaction between the spinning record and the dustcover generates more charge while the record is playing and a resulting effect on VTF. "Static"? I just ignore it.

 I believe static electricity is the biggest cause of surface noise and water is an excellent way of discharging static.  I also think static charges are created in the groove when it is rubbed by a diamond stylus.

Vevor makes an Ultrasonic record cleaner you can get a little over $100 that works well. It cleans 4 to 8 albums at a time depending on which model is used. I purchased to clean about 150 albums and it worked well. I'll use it to re-clean the albums I use more.

rbull11

45 posts

04-26-2025 at 05:55pm 

Vevor makes an Ultrasonic record cleaner you can get a little over $100 that works well. It cleans 4 to 8 albums at a time depending on which model is used. I purchased to clean about 150 albums and it worked well. I'll use it to re-clean the albums I use more.

 Report this

Thank you.The price sounds right.

I will have to check it out.

I clean as little as possible. 

Pull them out of the sleeve, play, put them right back in. Keep them clean in the first place. 

When that fails, I use the basic VPI. I bought mine decades ago now for $300 or so. 

I use a Spin Clean with Tergikleen (Amazon) about 20 to 25 drops per gallon of distilled water. I rinse over the sink using a pump up plastic pressure sprayer (inexpensive, Mac Master Carr, Amazon...) again, distilled water. I use a Record Doctor machine to dry and vacuum. Then the records air dry in a bamboo dish rack for at least 15 minutes. I also purchased label protectors from Amazon, I like the long handle version.  I use a soft stylus brush to give the stylus a single swipe, back to front for every play. I also use a carbon fiber anti static brush on the vinyl, usually three revolutions, don't press hard, let the fibers do their thing, and I draw the brush off of the record edge as I finish. I do not use cleaning formulae on the vinyl or the stylus, I think the possibility of residue is too great. Tergikleen is like Kodak Foto Flow, a wetting and flow aid, non detergent. When dry the records go into an anti static inner sleeve, and I use a record album outer sleeve. I personally store my records out side of the cardboard sleeve, inside the album's outer sleeve, which is simply my preference. I tend to use three revolutions in both directions with the Spin Clean, and what ever it takes on the Record Doctor to remove most of the water. You will, no doubt, experiment with your technique. I have found this record cleaning method effective and economical.  But, I would still like an ultrasonic some day.