2. speakers
  3. 1427424916

Can't get Acoustic Zen Adagios to sound smooth

I have owned a pair of Acoustic Zen Adagios speakers for over 4 years. They can sound very good, BUT also have a HARD AND UNSMOOTH sound when playing certain CD's. I have changed electronics from separates to an integrated amp, and recently purchased a Ayre CX-7e to replace a Rega Apollo. The Ayre easily highlights the limitations of the Rega player and outperforms it.

Nevertheless, the hard and unsmooth sound seems to prevail. It can also sound like an acoustic overtone, and (I think )the music looses its bloom or musicality. The current living space is well damped with maps,and rug hangings on the walls. I also have two 6 ft tall bookcases that contain only 70% less books than my previous apartment These shelves are in the corner, perpendicular to the speaker on each side of the room.

I encountered this problem before in a different and smaller living space.

I also recently changed speakers cables from a 4 year old pair of Audio Art SC-5 to a brand new pair of Grover Huffman which seemed to be slowly breaking in and are more detailed than the AA cable. I also replaced the standard wimpy power cord of the Ayre player with Panagea's new 14SE MKII power cord designed for just components, not amps. The Panagea PC is excellent, and has dropped the noise floor allowing for more detail to emerge. I drive the Adagios with the Rogue Sphinx hybrid integrated amp (100RMS)whose PC was replaced by an Acoustic Zen Tsumani Plus power cord.

I am beginning to wonder if there is another speaker that might provide a smoother top end performance and still have the taut bass, and detailed mids of the Adagios. Will appreciate all and any advice, even new speaker recommendations. Thank you
sunnyjim
cymbop
315 posts
 
Jim, I'll bet those Adagios could sing a different tune if you can drive them with a tubed output section. I'd try a new amp before I ditched the transducers.
thewizard
60 posts
 
try with tubes and try the acoustic zen satori speaker cables
soix
8,686 posts
 
Agree with Thewizard. You might contact Mark O'Brian at Rogue and see what he'd recommend for tubes. He told me a while back there's a particular tube he likes with the Medusa, so he might have a recommendation for the Sphinx as well.

And Satori cables may also bring you a step in the right direction as well. Nicely detailed but without etch and also convey rich tonality when it's there. You don't say what you're using for interconnects, but in my system they make a bigger difference than speaker cables and could certainly be a source of harsh or hardness, so you might want to explore that too. AZ Silver Reference is worth a shot. I mean, the guy who built your speakers designed the cables sooooo. Buy used and you can try this stuff with very little risk as there's a good market for used AZ wires.

Last thought is perhaps there's an issue with the speakers themselves. Not sure if maybe one or both of the ribbon tweeters might be damaged? Probably a long shot, but just a thought.
nanotweeter
55 posts
 
I had my AZ Adagios in my system with AC tube, battery tube/hybrid and SS amplification (integrated, power and monos). NEVER did they sound harsh when the recording was good. They were smooth, extended at both ends and grain-free with all amplification, albeit to variable degrees. I did, however, feed them via AZ Satori speaker cables which I still use (I like occ copper cables best) And my room is fully treated with sound panels and bass traps. But I understand that YMMV. I can only say that my Adagios never created a harsh, un-smooth presentation in my system/room unless the recording really sucked. Hope you find the cause to this issue. Regards.
bcgator's avatar
bcgator
355 posts
 
I'm with John 100% on this - the first reply to this thread nailed it. You already know the cause of the issue. You said it yourself..."from certain CDs". This isn't about new tubes, new amps, or new cables with lapis lazuli-filled coating. If you're on a wild goose chase, changing out components and cables, just to try and make listenable a CD that is poorly recorded, I've got bad news for you...that wild goose chase ain't ever going to end. It's a shame, but there are a lot of horribly mastered CDs out there, and if you build a system simply to cater to those, that same system may not make you all that happy when you actually use it to play something that was recorded well. You're welcome to empty your bank account on new stuff, but there seems to be too much encouragement to go changing equipment when the problem likely comes from "certain CDs". I'd love to know the titles of those discs you're hating...some of us may hate the same discs for the same exact reasons as you.
More to discover