1. Home
  2. amps-preamps
  3. 185716-184105

Balanced/Differential tube preamplifier recommendation?

First post here. Hello

 

I have a Wyred4Sound ST-500mkII class D power amplifier. I would like a balanced/differential tube preamplifier to go with it. Ideally I would spend less than $2000 on this preamp. A remote for power and volume control is a must for me. 

I would like something that is true balanced, as my source is also true balanced

I have seen a few options, but most seem to be out of my price range, and to be an uneven match for a fairly affordable power amp like I have. Any suggestions? Thank you 🙂

thought9
ditusa's avatar
ditusa
2,403 posts
 

@invalid Wrote:

Does ARC follow the balanced standard,

No! The method specified by AES48 is to use balanced lines and tie the cable shield to the metal chassis (right where it enters the chassis) at both ends of the cable. See below figure 1a:

Mike

https://www.ranecommercial.com/kb_article.php?article=2107

Post removed 
atmasphere's avatar
atmasphere
12,404 posts
 

steakster I've looked at that one. Would be perfect if it had a remote

@thought9 FWIW a remote volume control is available for the MP-3.

thought9 OP
15 posts
 

atmasphere really now? Is the IR sensor built into the preamp, and all that needs to be done is for a remote to be bought separately? Or do I need to buy a unit that is custom ordered with a remote receiver?

mbmi's avatar
mbmi
623 posts
 

I have the Audio GD HE-1 SE 10 tube preamp....It's a beautiful sounding pre for the $$$...can't go wrong. I paired it w/ the Peachtree GaN 400 and it's  magic... Good Luck to you.....

More to discover