Why Do Cables Matter?


To me, all you need is low L, C, and R. I run Mogami W3104 bi-wire from my McIntosh MAC7200 to my Martin Logan Theos. We all know that a chain is only as strong as its' weakest link - so I am honestly confused by all this cable discussion. 

What kind of wiring goes from the transistor or tube to the amplifier speaker binding post inside the amplifier? It is usually plain old 16 ga or 14 ga copper. Then we are supposed to install 5 - 10' or so of wallet-emptying, pipe-sized pure CU or AG with "special configurations" to the speaker terminals?

What kind of wiring is inside the speaker from the terminals to the crossover, and from the crossover to the drivers? Usually plain old 16 ga or 14 ga copper.

So you have "weak links" inside the amplifier, and inside the speaker, so why bother with mega expensive cabling between the two? It doesn't make logical sense to me. It makes more sense to match the quality of your speaker wires with the existing wires in the signal path [inside the amplifier and inside the speaker].

 

 

kinarow1

@knownothing ​​​​​​

Let it go, it is a lost case. He exists in his own little world. 

Those that swear that expensive cables make a difference but have no room treatment are the really blind ones. 

@donavabdear 

Thanks for your response to my post.

The time code to digital sound synching is a digression, but an interesting one!

It's not strictly correct to say that the analogue waveform of a recordings at different sample rates will be the same. If the recording has sufficiently high frequency information then that will show up in the analogue waveform converted from the higher sample rate recording.

Given the range of human hearing and the frequency range of musical instruments, some debate whether higher sample rates are needed but others will argue that frequencies above 20 Khz can be perceived even if they cannot be "heard".

But that's whole other debate.

 

True to a degree. I did treatments, then cables (not crazy$$$) then a few tweaks. For many there is a compromise as the room is multi purpose, cables are less obtrusive and do have benefits over the stock junk. Your statement @boxertwin12 is a bit over the top. No one is saying expensive but better built than the crap that comes from the factory. Kinda like putting a slip-on vs the  stock can on your BMW. Slight uptick in performance, fuel economy and sounds way better.