2. cables
  3. 182419-112482

Interconnect advice needed

Hi

I need an almost 10 feet interconnect between pre amp and power amp. Both with tubes.
I know all cables affects the signal and naturally I I want this effect to be as small as possible.
I've just bought Klipsch Heresy IV and I don't want the cable to emphase the midrange bump in these speakers even more.

Any suggestion for a cable this long max $1000?

simna
chayro
2,925 posts
 

What are you using now?  You say your speakers have a midrange bump. Is that something you know from listening in your room or something you read?  

simna OP
165 posts
 

@lak 

Just RCA.

 

@chayro 

Chord Epic.

Both from listening and something I've read.

kota1
2,706 posts
 

I prefer Mogami, available at Guitar Center or Amazon

simna OP
165 posts
 

@kota1 

Prefer over what and why?

kota1
2,706 posts
 

I prefer Mogami interconnects in my system because they don't seem to harm the signal and have a life time guarantee. 

i use the Gold cables in both XLR and RCA versions:

SPECIFICATIONS

Configuration Mogami Cables Configuration w2534 Mogami Cables Configuration w2893
Part No. W2534 W2893
No. of Conductor 4(Quad)
Conductor Details 20/0.12 OFC 30/0.08 OFC
Size(mm²) 0.226mm² (#24 AWG) 0.15mm² (#26 AWG)
Insulation Ov. Dia.(mm) 1.6Ø (0.063") 1.0Ø (0.039")
Material XLCPE (Cross-Linked Polyethylene)
Colors Blue / Clear (Quad) Black / Red / Blue / Clear
Served Shield Approx. 64/0.18A Approx. 73/0.12A
Jacket Ov. Dia.(mm) 6.0Ø (0.236") 4.8Ø (0.189")
Material Flexible PVC Flexible PVC
Colors 10 colours available 5 colours available
Roll Sizes 50m (164 Ft)
100m (328Ft)
200m (656Ft)		 50m (164 Ft)
100m (328Ft)
200m (656Ft)
Weight per 200m Roll 11kg 7.5kg



Back To Top
 

ELECTRICAL & MECHANICAL CHARACTERISTICS

Part No. W2534 W2893
DC Resistance at 20°C Inner Cond. 0.083Ω/m(0.025Ω/Ft) 0.13Ω/m(0.040Ω/Ft)
Shield 0.012Ω/m(0.0037Ω/Ft) 0.025Ω/m(0.0076Ω/Ft)
Capacitance at 1kHz, 20°C
(Partial C. Value)
See below figure*		 K0 65pF/m(20pF/Ft) 74pF/m(23pF/Ft)
K1 13pF/m(4pF/Ft) 11pF/m(3.4pF/Ft)
K2 4pF/m(1.2pF/Ft) 3pF/m(0.9pF/Ft)
Balanced
Quad
Connection		 Cond.-Cond. 97pF/m(29.6pF/Ft) 131pF/m(40pF/Ft)
Cond.-Shield. 110pF/m(33.6pF/Ft) 178pF/m(54pF/Ft)
Inductance between conductors at 1kHz. 20°C 0.4µH/m(0.12µH/Ft) 0.5µH/m(0.15µH/Ft)
Electrostatic Noise** 50mV Max. 50mV Max.
Electromagnetic Noise** 0.15mV Max. 0.15mV Max.
Microphonics at 50KΩ/ Load** 430m V Max. 30m V Max.
Voltage Breakdown Must withstand at DC 500V/15sec.
Insulation Resistance 100000 M Ω/ × m Min. at DC 125V, 20°C
Flex Life** 11,000 cycles 26,000 cycles
Tensile Strength 686N 500N
Emigration Non-emigrant to ABS Non-emigrant to ABS
Applicable Temperature -20°C‾ +70°C(-4°F‾ +158°F)
** Using standard testing methods of Mogami Wire & Cable Corp. * Partial Capacitance
mogami diagram w2893
More to discover