TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?


Dear friends: This tonearm critical subject sometimes can be controversial for say the least. Some audiophiles swear for non damped tonearms as the FR designs or SAEC or even the SME 3012 that is not very well damped in stock original status.

Some other audiophiles likes good damped tonearms.


In other thread a gentleman posted:


"  If a cartridge is properly matched to the tonearm damping is not required. " and even explained all what we know about the ideal resonance frequency range between tonearm and cartridge ( 8hz to 12hz. ). He refered to this when said: " properly matched to the tonearm ".


In that same thread that a Triplanar tonearm owner posted:


" This is the one thing about the Triplanar that I don't like. I never use the damping trough...... I imagine someone might have a use for it; I removed the troughs on my Triplanars; its nice to imagine that it sounds better for doing so. "


At the other side here it's a very well damped tonearm:


https://audiotraveler.wordpress.com/tag/townshend/


Now, after the LP is in the spining TT platter ( everything the same, including well matched cartridge/tonearm.  ) the must critical issue is what happens once the cartridge stylus tip hits/track the LP grooves modulations.

The ideal is that those groove modulations can pass to the cartridge motor with out any additional kind of developed resonances/vibrations and that the transducer makes its job mantaining the delicated and sensible signal integrity that comes in those recorded groove modulations.

 That is the ideal and could be utopic because all over the process/trip of the cartridge signal between the stylus tip ride and the output at the tonearm cable the signal suffers degradation (  resonances/vibrations/feedback ) mainly developed through all that " long trip " .


So, DAMPING IS NEED IT AT THE TONEARM/HEADSHELL SIDE OR NOT?


I'm trying to find out the " true " about and not looking if what we like it or not like it is rigth or not but what should be about and why of that " should be ".


I invite all of you analog lovers audiophiles to share your points of view in this critical analog audio subject. WHAT DO YOU THINK ABOUT?


Thank's in advance.



Regards and enjoy the MUSIC NOT DISTORTIONS,
R.






Ag insider logo xs@2xrauliruegas

Dear @mijostyn  : "" With proper tonearm matching damping is not needed and indeed is a negative. It is like adding friction to your bearing and forces the cartridge to work harder pulling the tonearm back and forth particularly on an eccentric record. Vertical damping might cause difficulty negotiating warps. 

Don't use crutches. Fix the problem.  ""

 

Well it takes me 2 full years to stay very near your statement meaning due that over those 2 years my room system fine tunning proccess arrives to an incredible top position in the quality level of sound reproduction.

There is no single tonearm that totally " Fix the problem ", however tonearm designers work hard to do it and they try to do it using different alternatives but today tonearms in one way or the other were designed taking in count seriously the damping issue. Some made it choosing the tonearm build material or blend materials or other solutions as the SAT that not only choosed a material but how they use it for the arm wand.

Please read here something interesting about and that's not easy to avoid it even today:

https://worldradiohistory.com/Archive-All-Audio/Archive-Audio/70s/Audio-1979-03.pdf     (page 42 ).

 

 

and from the radical damped Townshend tonearm patent we can read:

 

" for damping a range of frequencies of vertical and horizontal vibrations of the carrying means, so as to provide relatively low damping for frequencies below 5 Hz, moderate damping between 5 Hz and 20 Hz, and relatively high damping for frequencies above 20 Hz.

It is therefore an object of the present invention to provide a phonograph having damping means which is effective over a wider range of frequencies than hitherto known.

It is a further object of the invention to provide a phonograph having a vicous damper which has direct effect at the position of the pick-up cartridge.

It is yet a further object of the invention to provide a phonograph having damping means which can substantially avoid unwanted high frequency complex modes of vibration caused by the arm vibrating, and damp out other unwanted audio frequency vibrations of the cartridge and of the arm, whilst allowing free movement over warps and eccentricities. "

 

But in the last statement about " free movement " this can't be acomplished through silicon damping tray and certainly can't even in the Townshend and I said this because through my latest tests and due that I own very well damped tonearms ( that I was using the silicon tray ) with out the silicon tray sound reproduction I mean quality sound level reproduction is way better with out the tray specially from the midrange up range and all the high frequency range.

That clearly improvement is because now exist that " free movement " but we have to be really carefully that the tonearm/cartridge resonance frequency stays in the 8hz-12hz range.

Obviously that with out using the tray some cartridges that runned very well the canon shoots in the 1812 now have problems especially with the last 2 shoots however with the 1812 and other recordings  the bass range performance is extremely good. Even and talking of the bass range with out tray I had to increment the SPL in my subwoofers that means that with the tray probably existed higher developed bass distortions with lower definition due that was not ridding with " free movements ".

 

Seems to me that the free movement is the key here if the tonearm design is a good damped design.

 

R.

Technics knew very well and that's why used Boron blend in its tonearm arm wand and headshell along a resonance operation " Dynamic damping  balance weigth " through the tonearm counterweigth but Technics did not use the silicon tray as SME several years ago and today in its series V model and Triplanar and others.

The other Technics critical design characteristic is that the friction level in the bearing is as or lower than 5mg.

R.

@rauliruegas , Damn you have a long memory! In that statement I was referring to added damping like silicone wells and such. Items to try and dampen the cartridge's resonance point. Nothing in a tonearm can resonate. It is why Schroder does not put a rest or finger lift on his tonearms. All the materials and shapes of each individual part have to be used and designed to be critically damped at all frequencies in the audio band including at least 2 octaves above. You know all this already. I am preaching to the choir. 

The MC Diamond is a fine cartridge. I wish it's impedance was lower otherwise it is top notch. The signal to noise ratio is better in voltage mode but prefer the sound better in current mode. It has more punch. The MSL is comparably polite. Just as detailed but less of an edge and not quite as punchy. 

Dear @mijostyn : That " free movement " that unfortunatelly the Townshend tonearm can’t achieve is the real key to stay nearer to the recording if and only if the tonearm in use is a good damped design.

All what heppened in my room/system using that " key " was nothing " tiny " but higher improvement that I was not expecting and prepared too and that I had to increment the SPL in my subwoofers says a lot about because is not only that distortions goes lower but the clear definition of the low bass that’s not an easy task to achive. Overall I’m really happy .

Btw, of the really good vintage tonearms that I remember and owned only the MS MAX 237/282 came with a silicon tray that the owner can use using two different silicon density depending of the cartridge in use and MS gaves a list for the cartridges for one and the other silicon density.

Today those vintagey or new tonearm not well or undamped designs always could be benefiated by a not to wide riboon around the arm wand in an helicoidal way. Iyt does not affects the tonearm EM and improves the cartridge resolution during listening sessions.

 

About your MC Diamond maybe needs more playing hours.

 

R.