New Dedicated Line - Almost No improvement


Hello,

Newbie here and electrical idiot. Just moved to a new to us house in Tampa. Before we moved in I had an electrician put in a dedicated line (has it's own breaker switch) which is 10 gauge and two Furutech GTX-D outlets - Rhodium.

When I hooked up the EMI meter in my old house, which didn't have a dedicated line, the reading was usually around 26 or so IIRC. At the new house the outlets are 89 usually and the dedicated line is usually around 82 - so not much help for the cost of the "project" and pretty noisy.

Also, when the ac /hvac is running the meter reads about 100 points higher (!) for both the regular outlets and the dedicated Furutechs. Not good.

Thoughts? Does the dedicated line need it's own breaker box? 

I'm also considering a line conditioner but wanted to see what could be done here. Thanks.

laynes

all roads lead to the panel and the quality of the ground….. so few audiophiles….understand this…very close to FREE improvement…..

jim

When I had a dedicated line installed, my system improved slowly over the first 30 days or so of breakin. After that . . . sweet tunes whatever the cause.

questionable interpretations of how things work

@theaudioamp You're new here. What an insulting statement.

@jea48 's knowledge and advice is above reproach. Jim's interest and expertise has helped solve the issues of many members over the years. In order to troubleshoot, one must ask questions.

I wholeheartedly agree that the receptacles have not had breakin time. A Rhodium duplex takes 200 to 400hrs. of run-in time. Manufacturers such as Furutech state this requirement.