DAC diminishing returns

With Denafrips dacs I own 2 currently and in the mk2 version there is no micro skipping issue ,idont even know what that means.   Look up pontus mk2 , or Terminator 2 dacs read some reviews ,  if going to buy state what is your Max budget  this helps , as I mentioned the$4500-$6500 isthe sweet spot 

and they are made over seas Holo springs, and Denafrips  you would have to pay much more to = this   And both nowhave repair centers inthe U.S

 but are very dependable , they all sound different abit Multibit - R2R dacs are the original type dac chips and sound a bit smoother , going up the chain mola mola dac is great at$14 k  ,and of course DCS dacs but are $$ ,which have their own custom architecture.

Well a basic  thing about hi fi. Each step up cost proportionately  more for a smaller increase  in  sound quality. So it becomes  at what level are you happy with your system? The best sounding  system  for the money spent is one that is balanced. Nothing to high up the food chain for the rest of the system.  

Also another question  a friend of  mine has a Naim system and it likely is the system  I have heard that makes the biggest difference  if it it left on of any system  I have heard do you leave your Naim on? If not give that a try and see what you think after it has been on a couple of weeks. 

Regards

With Denafrips dacs I own 2 currently and in the mk2 version there is no micro skipping issue ,idont even know what that means. 

@audioman58 

I'm glad to hear that you haven't had any issues, but it is wrong to imply that the mk2 is immune to such issues. My Pontus was a mk2, and there have been plenty of other reports. As to you not knowing what it means, well, you apparently haven't researched the topic.

Here is Denafrips' primary hypothesis, as articulated by Alvin himself:

Denafrips DACs use an internal reclocker when the DAC is connected using SPDIF or AES, which uses a small FIFO to buffer the PCM samples before they are clocked out using the internal clock to the R2R DAC. 

SPDIF (and AES/EBU) assume that the source controls the clock, but as we all know this can introduce jitter resulting in poor performance. By buffering the data and reclocking it, the DAC can all but eliminate the issues with jitter, but this only works well if the source clock is close enough in frequency to the DACs reference clock such that the FIFO can handle the timing differences for the duration of the stream.

If the source clock is operating at a significantly different frequency from DAC clock, or the time between resetting the buffer is too long, the FIFO will either overflow or run out of samples and you'll get a drop out or stutter. 

Whipsaw I use USB ,  and sonicly sounds excellent , the fifo buffer does a very good job and in the Terminator2  or T+ dac using duel Over clocks ,makes itine excellent dac ,yes IHave read about conversion  topics but sonicly  way way outof any distortions I can hear or even a 🐕 for that matter . Just read current reviews 

on the terminstor 2 , T2+ dac.

it is as good or better the the Holo springs May KTE dac ,all depending on taste 

they both are excellent depending on your system I have heard the vast majority of dacs side by side in New England we have multi state audio get togethers.  With many great systems most out ofmy pay grade over $100 k+   Much more today 

then in the past.

Thanks again for the “sound “ advice.  You have provided me with options that I haven’t considered.  Chord is one name that was not mentioned.  Their reviews are consistently favorable. Seems many use Chord as a reference.  Thoughts and experience with Chord would be appreciated.

Also, upgrading my RP 3 hat will happen if I jump to a better DAC.