Isolation Advice Needed

@whart Active air suspension, as you aptly pointed out, might leave table in an uneven profile for a short time while it tries to adjust. MinusK seems to be a better all-round solution, if needed.

@steakster Thank you, did research those too. All footer suggestions are great for electronics just have to choose the right one for mine. OTOH, for TT I'm looking for a future proof solution.

@jerrybj Lol

@henry53 Thank you, I have been researching those as well. I did get a video of the crawl space and as @noromance hinted, there are concrete piers with smart jacks at regular spans (8 ft apart) under girders. So the floor is not bouncy but given the empty space (crawl space), I can see vibrations can amplify and travel along the floor.

@elliottbnewcombjr  Thank you for a detailed explanation of your solution. The floor has no bounce at all (at least for now), My main concern is what I explained above. Love your JVC TT though.

@oldaudiophile Thank you for the insight and suggestions, I'm yet to decide on the furniture for the room. Not sure what the mrs will want to put in there :). My older kid loves to dance when I have the music playing so that's the other reason why I've been researching. I might go for a heavier TT later this year so what ever isolation solution I decide on has to be future proof.

I agree, I should wait until I make my decision but wanted to get some great suggestions in advance so I have enough data when its time. 

Best Regards

The equipment I listed in my original post are only the ones that I thought were VERY sensitive to vibrations. I have the following additional components ...

1) Tandberg TD20A SE (Reel-to-Reel)

2) Tandberg TCD-3014A x 2 (Cassette decks)

3) Oppo BDP-105

4) Sony 75ES DAT

5) Genesis Digital Lens

6) Benchmark DAC

7) ExactPower EP15A

@livin_262002 

I am an enthusiast of Symposium Acoustics products.  The owner, Peter, is easily available to speak with by calling them direct.  He will guide you very well, regarding your particular situation and needs.  Symposium offers a turntable specific platform called the Segue ISO.  This platform is made of the constrained layer design, like all Symposium platforms, and also uses springs which are available in several sizes as needed per the weight of the turntable.  The Segue ISO comes in several standard sizes as well as can be ordered by any custom size that you may need.  Try contacting Peter and see if he has to offer what will satisfy your needs.   The website is very helpful and detailed.  Certainly worthy of your effort.  Best to you.

@livin_262002, don't know how you feel about the possibility of a wall mount for the TT but that is one consideration to consider if  you decide it needs isolation. Nothing wrong with that P6! That is one nice TT. Just needs to be placed on something rock steady because of that low-mass design.

Back in the day (i.e.  early 70's), I had my eye on a Tandberg R2R and, also, a Revox.  I would have loved to buy one of those things but couldn't afford a good one. So, I settled for a Craig, at the time, which lasted a very long time before I had to put it out to pasture.

All the best!

Man, I should have skipped this thread. Now, I am thinking of crawling under my house to brace what I absolutely know needs to be braced. The house was built in 1930 and code was something that only Morse knew. There are a few soft spots in the wood floor in 3 locations in different rooms and one of them is close to the audio system.