Kondo Overture PM2i - buzzing noise from transformer

Overture audio has an excellent reputation. I have no doubt they will resolve your issues. Maybe they have another Kondo that doesn’t buzz. But I wouldn’t be shocked if you bring your amp into them and it doesn’t hum. Transformers can be sensitive to power lines, as you well know.  Let us know how it comes out. 

Well yeah, they were very helpful but in the end, their and also my conclusion was, that because the measured buzz/hum noise is within their specification and even lower than the buzz of their reference Overture in factory. The CEO himself took care of measuring and provided a photo of measured result. The buzz is supposed to be normal. For me the solution is to sell the amp or to but it in a sideboard with enough ventilation to reduce or eliminate buzz at listening position at very low volume. I must add, that my listening room is very quiet at 26 dB noise level. iPhone put directly on transformer resulted in 32,6 dB and at listening position there was measured only 1 dB higher noise level 🤷🏼‍♂️. 

Oh, I thought you bought the amp from Overture Audio.  My mistake.  Who did you buy it from?

Dealer in Greece/Athens

So call your dealer. I cannot tell you how many times I see this. People have issues with equipment and they don’t contact the dealer.  Dealers make big margins on these items and part of that goes to customer service. I cannot believe that any dealer would not take very good care of a Kondo customer.